Bolt in On Board Air Compressor Mount

How much room did you have between hood and bracket?

 

I'm mounting a Ride Rite compressor on it for my Air Bags.

 

Hey Tony! PM sent for payment and shipping info. Thank you

 

@BigWalker any progress with your ExtremeAire bracket?

 

1st two pics are plate clamped to BB bracket for match drilling




Finished plate drilled ready for inserts

BB plate inserted theses are the same holes for ARB compressor enlarged to 5/16”
The new plate will bolt to these

 

Last pics
First is BB inserted, painted and installed
I didn’t have a 3/8” mandrel so the top plate is painted and waiting
To install is a 3 step process, install BB mount, install top plate, install compressor. I used nutserts to eliminate . Not necessary if you have long fingers lol

 

Hey everyone! First off I’d like to say thank you to everyone who has supported me and making these mounts. I still have more in stock and am shipping out every week.

At this time I have sent out messages to everyone on my list. If you have not heard from me then please send me a new message as I may have missed you on my list and I can get a mount sent out right away.
Thanks again and I look forward to seeing all the install photos!

 

How do I get on the list to order the twin mount?
thanks in advance!

 

Sent you a message! Mounts can be shipped right away now. Thank you!

 

@Bannock452 sent you a PM!

 

Do you still have the twin mounts available ?

 

Yes sir. Ready to ship right now. I will send you a PM with more info. Thanks!

 

@Bannock452 please PM the info on buying one too. Thanks!

 

Bracket received and compressor installed.. Bolted right on, perfect ! Thank You !

 

Will the ARB twin and @Bannock452 compressor mount fit with the TRD Cold Air Intake?

 

I personally have not tested the twin mount and compressor with the TRD intake. I believe the TRD intake is slightly larger than the 3rd gen stock airbox. I know the mount will clear and fit but the compressor may be very close or touching the TRD if it is actually larger. I can always send you the mount to test fit if you would like. And if it doesn’t fit I can give you a full refund and take the mount back. Let me know what you would like to do.
Thanks!

 

PM / DM and Instagram sent for the Dual ARB mount.

 

Got mine quick and got it installed! Very nice setup. Thanks Brandon.

 

@Bannock452 Do you still have the twin mounts available ?

 

PM sent for a twin mount. @Bannock452

 

@Bannock452 PM sent. Thanks

 

@Bannock452 will your twin compressor mount work for just a single ARB compressor or will new holes need to be drilled? Reason I ask is that I bought your twin compressor mount but and going back and forth between twin or single ARB compressor

 

Hadley Horns H00961EA Bully Series Horn https://www.amazon.com/dp/B001FMNU54/ref=cm_sw_r_cp_apa_i_A.3RDb2X000PD

You guys that have bought the mount, do you think an air horn kit this size would fit on the mount?

 

Yes sir the single compressor fits great with the twin mount. But Yes new holes will be needed on your current mount. You maybe be able to use the 2 existing holes on either side and just drill 2 new holes for the single.
Going to work on getting the single holes cut during the waterjet process for future twin mounts so they can be used for both compressors.

 

I installed one of the @Bannock452 arb mounts recently and wanted to drill some holes in it (holes needed for my specific needs, nothing to do with the great design) and I can say, it’s is an easy task to drill a few holes in it if needed. Took no time at all and came out great. Awesome mount made by a good guy. Can’t recommend these mounts enough.

I also have the twin arb and I’d recommend it if you can swing it financially. Airs up my tires (and who ever else needs it) nice and fast! And with this mount it’s out of the way but easily accessible.

 

Thanks Mouse!
One of the reasons I use aluminum for the mounts so it’s easy to adjust or make some changes for different needs.

 

Hey can you Pm a Price point on the twin mount if you are still making them.

 

Yo @Bannock452 we need to test fit the Viair 400 on the next run we do together on one of your mounts. Of course I would just drill new holes. I'll buy one for sure if it fits. Maybe i can just test fit on @TheFreshMouse since he is so close and is such a good guy .

 

So I shouldn’t go wash my truck right now? We meet’n on dirt? Lol

 

hahah you and your Mondays off. I wish i could go hit some dirt today or tonight