Bigger cup holder

i have a 2018 Tundra and wondering if a larger base cup holder is available. Can’t fit my favorite cup in the factory one

 

They sell a million types on Amazon. I have one that extends to fit a 32 ounce jug.

 

This is what i use.
https://www.amazon.com/gp/product/B01M028L5E/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

 

Links to how you searched on Amazon, as I don’t see any that will extend higher and enlarge, thanks for the info

 

Thanks loads just ordered a couple

 

Click the link above that @Danimal86 posted

 

This is the one I have too. Very solid and does exactly what it is supposed to do.

 

Fyi, when you open it up, you might think that it came with a can koozie, its not. Use it over the rings that sit in the cup holder to give it a tight fit.

 

I have this same one for a 36 ounce thermos. It’s perfect

 

Rtic tumblers fit perfect!

 

My wife carries a big as water bottle, bought this for her car and had to buy another for the truck, pretty cool how it locks in. https://www.amazon.com/gp/product/B0752DZ1SB/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

 

Rtic bottles and coffee cup no longer fit. Not sure I want to raise them up that high with an extension. I’m willing to cut the whole center cup holder section out and start fresh.

 

What do you mean they don’t fit!’vbvvcfuhdnmdj

I was about to order a few more online. Did they change?!?!? Those wankers.

 

I had a cup that I liked with fat bottom. I had to hold the cup while driving. Rather than modding the cup holder, I got a new cup (holds 32 oz, I think) with narrower bottom. I guess I am lazy (or I wasn't as attached to the original cup), haha.

 

Check out the holder I linked there are no adapters

 

In the stock cup holders. The additional inserts will have to raise the cup or bottle up enough where I’d expect it to be too heavy

 

Just my two cents - but the BottlePro linked above is garbage. Nowhere near secure with a Nalgene bottle sitting inside it. Threw it out after a month.

 

I bought 3 of these. They are awesome for Tundra cup holders. The 3rd one is for the wifes 4Runner.

 

Those look cool. I'm up for it, except quite a few of the reviews say they broke. How long have you had them? One person said they're manufacturing them with different material now [stronger], but the amount of 'broke through normal, light usage' complaints is fairly numerous.

 

I’ve been using two off the Amazon link I posted for about 2 years now no issues they are awesome. I’m sure if you torque them too hard they will bust....

 

I just purchased one of these as a trial run. I wanted something to hold a standard cup from a coffee shop without tipping. This works!

I'll be purchasing another one for the passenger.

 

Only had them for a week and they seem very sturdy. I can see somebody breaking one though by over-tightning them in a cupholder. I have mine turned tight enought that they won't move or pull out. Wouldn't try to push my luck by testing them tighter than that. Really like them for hooding my sunglasses also. The tundra holder is worthless.

 

I just bought a new Yeti cup and 30 oz Tumbler, so I am going to order this.

Yeah, I hadn't thought about people trying to over-tighten them [of course, people would do that].

 

Mine is as tight as it will get and I still can pull it out of the Tundra cup holder with minor resistance. It's pretty much at it's limit when installed so I cannot see how it can be overtightened.

 

So ... you're a Raiders fan ............................................................................................................................. that's unfortunate .......................................................................... we might have been friends.

 

There is a sweet spot for the expanding prongs make sure you line them up as well as possible and when tightening don't let them move. I would assume all of our cup holders are the same diameter but maybe there is a difference in the cup holder brands I'm using the swigzy. You could also cut some double back to the prongs to give you a litter more thickness...

 

Thanks for the suggestions! My wife has a '14 highlander limited and her cup holders fit my 32oz Nalgene perfectly - idk why they didn't give the Tundra the same bigger holders. I was hoping there would be a mod available to remove ours and replace with the bigger ones. With the trim it's clear there's enough room to fit them

 

If you need another suggestion, look on Etsy for 3D printed cupholders made to exactly fit your OEM cup holder. Those ones with adjustable wings n such just break over time