Newest Thing From ICS FAB!

*UPDATE*
There was enough interest to make this product a reality. To all of you that purchased from @ICS FAB due to this post; thank you!!

————————————————————-

Many of you, like me, have little ones that need entertaining in the back seat. After installing my @ICS FAB dash mount, an idea came to me. What about one of those for the back of the center console?
I floated the idea to ICS and before I knew it they had a prototype in their demo truck.

Check it out by clicking here and get your preorder in to take advantage of intro pricing!
They are trying to meet a minimum in order to put these bad boys into production. It's now or never y'all!

 

Good feedback!
Luckily once I get my kiddo going he doesnt really need to mess with it again. Future binge watcher in the making

 

I know the feeling!
I still need to buy tires for the wheels that are on their way

 

Very true!
Tweens can sit in the back and record their TikToks

 

Is that how you record your Jewish cooking show?

 

But how do you get the gefilte fish smell out of the Tundra?

 

That's a dont ask dont tell sort of topic

 

Just to be clear y'all, this isn't a product development thread, it's a preorder sale thread. ICS is a top notch company and will see these comments and possibly make changes on the design if needed, but the product has been designed and tested already. Seeing all this feedback is invaluable, and won't go unnoticed.

The console opens fully with this mount in place. I only have the two photos, but the second one in the OP is with the console lid open all the way.

The power outlet stays fully functional along with the AC vents. The whole back side of the console pops off with pressure clips making it easy to get in there to mount this. (There is drilling involved just like with their other mount)

To all that are confused what you can mount on this modular panel, check out rammount.com! Pretty much anything on that site can be mounted to this panel, from cell phones, to tablets, or even cup holders, cameras, gps units and just about anything else. The only limits are your imagination!
Scroll through few the dash mount threads if you need inspiration, this is a good one: https://www.tundras.com/threads/ics-fab-2014-dash-mount-ram-mount-compatible.38643/

 

That's a wonderful question!
I'm like 85% sure the back part is the same, so it should fit

@ICS FAB any idea?

 

#boom

 

Here’s a link to my mini write up:

https://www.tundras.com/threads/the...d-b-s-hangout-spot.45621/page-16#post-1930821

yes, washers on the back side of the panel, and the front panel pops off with a panel popper.

 

You can use a screwdriver if you’re careful. That plastic is awful soft though, so be very careful if you go that route