3”/1.5” to level ?

I need some opinions. Goal is to level and even slight rake would be fine. Already ordered 285/70/18 RG with SCS ray 10s +25 mm offset.

option 1: Bilsteins 6112 set at 2.5” with CB shim each side for 3” front with 1.5” shackle in rear.

option 2: Bilsteins set at 2.5” and shackle at 1” in rear.

Option 3. Bilsteins set at 1.9” with two driver side shims and one passenger side shim and shackle in rear (1” or 1.5”??)

I have 5100s in rear already and I already have Icon delta joint UCAs being installed as well.

thanks for any input, experience.

 

Click on my build thread Supe's MGM Sport Build for all your answers.

 

I have the 6112s at 1.9” and CB +2 shackles and I have a slight rake. If you want yours level then 6112s at the top setting with CB +2 should do it.

 

3/1.5 will look the best in my opinion. When these trucks don’t have rake in the rear over a certain amount the front end always look higher to me. I’m at 3/2 but I have a canopy and put a tent on so I’m sure it settles to 1.5 I think it looks perfect. I had 3/1 for a while before and like I said always look nose high....I did 2.5” nothing in the rear at first then did 2.5/1 which looked great then upgraded to my fox 2.5 coilovers. Keep some rake. Make sure to do a cb drop to anything over 1” and diff drop in the front anything over 2.5.

 

Sweet man! Your truck is absolutely sick.
I’ll post pics in a week with competed setup but here’s what I’ve done so far.

What do you have your Bilsteins in the front set at?
https://www.tundras.com/threads/my-19’-limited-transformation.63091/#post-1649380

 

The 6112s are set at the top setting and I have one shim on the passenger's side and two on the driver's side; 3" of total lift.