What have you done to your 2.5 gen Tundra today?

3/1
33x12.5r20
1.25 spacer
No rub

 

Hey Tim, is that a 6" lift? More pics please!

 

the usb charging issues.... is this just the charging usbs or usb to control CarPlay/aa

 

Do the AC vents rings too. I did everything in mine except for the shifter and door trim/handles.

 

I did the SEM on my interior.....good stuff. Pics are in my build thread.

 

Wash and detail the Tundra today!

 

For me, it’s only the dual charging USB ports. Others work as they should.

 

Those front shackles are huge. I haven't seen any like those. I need to order shackles for my rear bumper that I just installed.

 

I have 4 AJT black ones in the garage waiting but may wait to get to some cement color rings to match the leather in there

 

Nice. I see your AF symbol....retired?

 

Chrome delete is officially complete!
Swapped the chrome handles for black.
Took me about 20 minutes on the driver door, less than 10 on the passenger (since I knew what I was doing at that point).
Rear doors took about 3 minutes each.

For anyone doing this mod on a 2020+ with the smart entry door handles, obviously you have to remove the door panels to access the plugs. Pay attention to the little white push screws used to hold the panel into the door. I had several on each door stay in the door instead of popping out. Had to pry them out and reinsert them into the door panel before snapping it back in place. Otherwise, its a pretty easy job.

Also installed a tailgate mat and did some cargo management, and installed a Maglite on the underseat bracket. Not the best flashlight in the world, but works fine for general use (746 lumens), its fairly inexpensive and it matches my truck.

Before:


After:

 

I just noticed this yesterday. I plugged some usb lights into the ports and both run for about 5 seconds and shut off for 5 seconds then repeat.

 

Demon hooks!

 

No, I’m AD. You?

 

Retired from Macdill in 2015.

 

Nice! I have 1+ years till I’m eligible for that magical DD214

 

Nice. I was aircraft maintenance. Now I'm a GS and still at Macdill.

 

Thank y’all both for service!

Brought the Tundra to my local dealership for a 2” level up front today.
Hope sensors act right afterwards...

 

Thank you. Yes you will be good with the level. I'm lifted 4/2 with no issues.

 

Thanks for your input. Maybe the current draw on those little lights is too low to keep it operational (low power cut off?). I’m going to play around with it some more to see if I can figure out what the heck’s going on.

 

Full disclosure, I've not fully caught up on this thread so I apologize if this has been asked, but aren't the coolers supposed to be mounting with both the hoses going up instead of to the side? Could have sworn I came across that in my research months back, but I might just be mixed up. @chasenicholas93 can you shed some light as our cooler guru?

 

Decided to just 3D print my own “credit card holder” switch blank...
I had previously tinkered with the socket design, and found a design on Thingiverse set up for Carlisle switches, but found it was a bit sloppy and so I just started working things out on my own.

 

This is one of those "If you have to ask you can't afford it" kind of questions. I about fell out of my chair when I looked those tires up.

 

Mounting the ports on the side is actually the preferred method of mounting a cooler as long as the inflow is on the bottom and outflow on the top port.

 

Figures I'd remember it wrong!

Thank you, @chasenicholas93

 

Just curious, why do you have shackles on the truck unless your offloading? I would think over time the friction of the shackles would wear down the paint on the bumper from it moving back and forth.

 

I actually had my son hold it in different spots while I checked the view until I found what I liked best, needless to say he was less than amused

 

Share some pics when you get them printed.

 

For some they just add to the aggressive look. Most of them have rubber isolators on them that prevent noise and rubbing.

 

Reminds me of the days when I had to hold the flashlight and got yelled at because I wouldn't hold it still lol.