+18 offset

Hey guys. I’m looking at getting some rims with a +18 offset 18” with 285/65/r18 bfg ko. I’m leveling the front 3”. Would I have any issues with rubbing with that set up? Thanks

 

No problem. In fact, those tires will look small with that setup. Most go with 285/70r18, 295/70r18, or 35x12.5x18 tires on an 18" wheel, +18 offset (eg. Method 316) with a 2-3" lift in front.

 

I really don’t want to get into cutting anything. Would I have to with the 285’s

 

My truck in profile picture is 2.75 inch front with 285/70 18. No cutting or rubbing.

 

Also a 2020 limited.

 

That’s with a +18 offset. Damn it looks good!! Thanks for the help

 

I have that set up and only have 1.75 lift up front and Wildpeaks 285/65/r18 and I think it looks too small.

 

Do you have a pic from the back to see the “poke”?

 

I don’t have straight from the back.

For reference, wheels are Vision Wheels from Discount Tire and tires are Ridge Grapplers.

 

That’s perfect! Thank you! 18x9?

 

Correct. Drives smooth and straight. The wheels and tires didn’t take a huge amount of weight to balance.

I do have SPC upper control arms.

 

Good to know! Will be upgrading my wheels super soon and been searching around for options.

 

I was set on Method Mesh but these look great to my eye and were far cheaper.

 

I think it looks small but might also depend on the type of tire

 

For sure! I ran vision wheels on my Honda Civic for almost 10 years with no issues so familiar with the brand.

 

Those aren’t bad though! Has a great stance just a different look. Sometimes there’s too much tire stuffed

 

Method 317- 18x9 +18 offset with 295/70r18 only rubs the front plastic at stock height on my truck. No frame rub.

 

Beautiful truck!

 

Thank you. Lift coming up next, hopefully..

 

Awesome! What are you going with?

 

Not sure yet. Probably kings or the like.

 

Nbd. Kings would be legit

 

Love the looks of the 317s on this truck and I'm looking for a set for mine but I recently put a set of ridge grappler 265-70-18s tires on and would like to run these for a while. Would my tires look ok on a 18x 9+18 rim? Im stock height as for now thinking of adding a small lift in the future. Thanks

 

my wheels are +25 offset not 18
295 70 18 Falken AT3 Method wheels'
coachbuilder bumper shims - i didnt an to do BMC at all

 

Did you lift the rear at all? I saw you had a 2.75 front lift. I'm thinking of going 3" in front, nothing in back, or 4" up front, one in back. I hate rake. any rake. . .

 

I'm considering the same wheel for my white 2021. Do you have any more pictures you wouldn't mind posting? thanks

 

Unfortunately, I do not have any other photos with those wheels on. Oddly, I don’t have many photos of either wheel/tire combo I tried.