What have you done to your 2.5 gen Tundra today?

I use a somewhat similar set up. I do a fair amount of stealth camping as well.

What makes me nervous in your photo is how close your sleeping bag is to your heater. I would be concerned about a fire.

This is what I use.

 

Sounds like a fair swap, but if I'm gonna clay it I'm gonna have to polish and seal it too. I've got my whole detailing set up so we'll have to swap trucks some day in 2024 when I get my truck back.

 

TRD Rear swaybar finally back in stock and arriving today. Front and rear will be installed this weekend.

 

i like the flag overlay, can you provide details on how you did that and what to purchase. thanks

 

Had to remove the shifter handle and center console “tray” to access.

Purchased 5x8 sticker to ensure full coverage of shifter base. Found what I was looking for on eBay

Cut small hole to slide sticker over shifter rod, then cut sticker to get sticker lined up properly. Then removed back and placed sticker over the shifter base. Lastly, took exacto knife and cut off the excess sticker around the base and cut out the shifter “track”.

put everything back together

 

What I imagine will happen if you turn on one of those meso lights while driving

https://www.instagram.com/reel/CZD6QpihLX7/

 

I love this look..

 

Found this Hawk on my truck. Didn’t even fly off when I started it up. Even the wildlife love our trucks!

 

That is cool as hell.

 

Total distraction from the bird crap on the windshield

That's pretty cool though

 

Still Chillin!

 

I like it. I'm currently running the vinyl decals in white, but this would be much better!

 

Thanks man. @DecalsByDesign made it for me a couple years back. Not sure if he's still doing custom orders or if he's even still active here.

 

New set of tires.



285/70 18 Nitto RGs.

 

Threw on a makeshift catalytic converter alarm so I can have some peace of mind until my shield arrives from Valhalla. Went with lithium AAA batteries since it’s below freezing outside.




Used this alarm: https://www.amazon.com/dp/B07TZTG5JY/

Paired with this magnet and wrapped a little of tape around it so it fit nice and snug: https://www.amazon.com/dp/B00IYFPKEY/

It’s only going on during the night, I’ve seen some people attach these more permanently with some heat shielding and hose clamps but that sounds like some wild temperature fluctuations to me.

 

Let us know what the neighbors think that one day you forget it's there and start her up without turning it off!

 

Picked up a blemished Ray10; mounted my spare 285/75 R18 Duratrac; slung it underneath. Moved the brackets forward - fits like a glove!

 

Yup

 

Your 2.5 gen reminds me of what mine use to look like.

 

I had the same for a little while until my plates came, its honestly not loud enough to annoy neighbors but the shriek will definitely scare the shiz out of someone crawling under there expecting an easy score.

 

How long did it take you? I need to add bumper shims to mine now, if there is a break in the weather I might give it a shot.

 

Curious on what it cost you, the prices seem to be going higher and higher.

 

Trailer brake Controller mostly plug and play installation time 5 minutes at most
Rear Air bags - "Load Lifter 5000 ULTIMATE" Air Springs w/ Jounce [REAR]
Air Lift WirelessAir Compressor - 2nd Generation w/ EZ-MOUNT & Cell Phone APP (Control Two Springs Independently)
Weathertech Floor mats
Black nameplate Grille Assembly installation time maybe 15 minutes
Towing Mirrors installation time 30minutes
Steel wheels for a winter set of tires.

 

Started the interior chrome delete.

I didn't like the bolted on look of the AJT pieces and didn't want to go the rattle can route. Found this on Amazon and couldn't be more pleased with it. It's a perfect fit, seamless once installed and a spot on match for the OEM plastics.

https://www.amazon.com/gp/product/B09NBL2LVR?ie=UTF8&th=1

 

bout to pick up a 2013 here in a couple of weeks too

 

Totally agree with you, the bolt-on look doesn’t match the rest of the interior. This looks great!!

 

Same. Not a fan of the bolt on look and Kind of an unnecessary install as well.
Personally I’m holding out for the meso one. Oem fitment and look

 

Meso is making one?!