Keep blowing 10 amp fuse

I have a question. I keep blowing the same fuse under the driver side fuse box that is labeled “STOP” and it’s a 10 amp fuse. I get a bunch of lights on my dash saying trailer brake and brake override malfunction and a few more lights and also stuck in park. Does any one have an idea what’s going on or a fix to stop blowing fuses? It’s a 2020 Tundra SR5

 

Any mods done?

 

Tail lights were done a few months ago as far as electrical goes.

 

Define tail lights were done.

 

Seems you have a short.

 

Ahhhhhhhhh....LED conversion by chance?

 

I went from stock tail lights to a aftermarket LED and I forgot to mention I changed out my headlights and fog lights to LED also.

 

Did you install resistors? Did you have any issues with hyperflash?

 

This. Trailer system and brakes system all tie into the brake lights. Your new brake lights are the culprits in what capacity is hard to say however.

 

Thank you for everyone help! It turned out to be my taillights causing the problem. Put the stock lights back on and so far zero issues.

 

Put resistors in you'll be able to keep the new taillights