GEN 3 (2022+) Wheels and Tires Photo thread

Great looking truck! I’m looking to add the PRO fender flares. Were they difficult to install?

 

I need to get some E rated tires to tow my 10k # trailer safer. I towed a few times with my 22 plat and the stock tires which I slightly over inflated to 55psi.

I am looking at Micheline Agilis CrossClimate. Has anyone used these before? Thoughts, or reviews?

Of the available 20" tire sizes while on stock 20" wheels, any reason to get one over the other?

• LT265/60R20121/118R
• LT275/65R20126/123R
• LT285/60R20125/122R
  
  

 

posted this in the mega lift thread as well but figured i would try and get an answer here too

this has been discussed several times generally...

for those of you who have pinned back the felt in the front wheel well, how specifically did you do so?

it looks to be a 12mm hole in the body but it isn't threaded. i could tap it and add threads but haven'theard of anyone needing to do so. i haven't found a plastic rivet that will work either.

295/65/20 toyo at3's going on this week and trying to get the pinning out of the way beforehand. thanks in advance for the help.

 

Man I want TE37's so bad I just wish they offered more offsets. When you get them installed post some pictures!

 

Post some pictures when you get your wheels on. I'm trying to decide if I'm ok with the offset and poke of the Gram Lights or Volks.

 

Nitto Recon Grapplers 295/70/18 installed on my 23 SR5 TRD Off-road on the stock rims, suspension

 

Any rubbing?

 

No rubbing experienced yet

 

Will do! Just waiting for the right price on 35s

 

That looks awesome. How’s the ride difference with those tires compared to the stock Michelins?

 

Looks so good. You've somehow made the 18" TRD Off Road wheels look good!

 

I think this is the best place for this question: I have 22 sr5 and just ordered method 316s in 18X9 +18. I also have a 1.5x1” spacer level from corn fed suspensions. I am going back and forth between 285/75r18 and 295/70r18. The plan is to go with wildpeaks in E. I really don’t want any rubbing, I’ve gone through this entire thread and can’t make my mind up. Any thoughts from the professionals?

 

They're very similar.

 

Yeah I guess it’s a question of slightly more height or slightly more width, idk which is more likely to cause rubbing though

 

I think they both should be fine. I'd have the tire shop test fit the one you prefer and ask them to put the other one on if it rubs.

 

Found a set of 18x9 TE37 M-Spec local to me with a 0 offset available as anything + is going to take 4-8 MONTHS to arrive. What would be the best tire (no larger than 35") that Toyo or Nitto
offers that would be the least amount of "poke"??

I really suck at picking out wheels/tires sometimes and this is one of those times....

 

Just do it. It’ll be sick!

 

Ha! If these wheels weren't so friggin' expensive I'd already have them, trust me. Just double checking with the tundra hive.

 

I am looking at some Method 701’s 18x9 et 18. And some toyos or falkens in a 35x 12.5. I am running my out of the box suspension that comes on the TRD off road package with no lift. Does this sound like a tight fit where I am cutting lugs off the tires against the fenders?

 

It's hard to describe accurately.
The stock Michelins bad a distinct humm at speeds over 70mph. The Recon Grappelers do not. The ride is maybe a touch rougher but nothing substantial. Driving with these definitely has a different feel to it. I've only been able to drive the truck two days with them on before leaving for a business trip, but as of right now my mpg dropped by .6 mpg

 

Thanks for the kind words.

 

DO NOT trim your tires….. trim plastic and pin back fender liner

 

Thanks, I was concerned about the tires being too big and would get damaged by the sharp edges. I do want to get a lift but waiting for the prices of the TRD kit to settle down. In my area, I will be looking at over 7,500 bucks for that.

 

well after a few weeks of discussion the wife decided on getting these. cant find any blue rims that come close to the dark blue and they all didnt look right with an off shade of blue. better to go with a constrasting red than weird blue shade.

 

Good call. Think it will look good with a little red.

Also just realized from your post that we can see our trucks in the websites like TireRack now when looking for wheels. This will be fun

 

Falken Wildpeak 275/70R18. Stock suspension. No rubbing at full lock.

 

i used tirerack for a side view and used a local tire dealer for the angled view.

if you care to use them its tiresplusnd.com for the angled view

 

I been waiting on my method 305s for a bit and just received an email they are back in stock with a descent price for anyone else looking. I already have the Trd lift waiting, falkens as well

 

What size wheel are you going with? Offset?

 

Looks like I can't buy Methods direct. I have to go through some middleman up here in Canada. So my price doubles! I might try to pop down into Wash and get some wheels and tires if I can free up some time. Certainly would save a few thousand!