What have you done to your 2.5 gen Tundra today?

Whenever I travel out of town, my battery operated impact and 22mm socket go with me to make it easier if needed. Had to go change my mother in laws flat a few months back and it saves so much time than a manual lug wrench.

 

I found someone selling a cordless impact that matches the rest of my 20V cordless tools for $30, snapped that up and another set of deep impact sockets, and an adapter to run a scissor jack, breaker bar, and now I just need to remember to swap the battery occasionally so it's always at charge. Nice to have that peace of mind under the rear seat.

Also need to remember to occasionally white-lithium lube up the spare drop mechanism so it's accessible!

 

Yes sir, Brazos Bend State Park south of Rosenberg. I highly recommend, we are on a quest to hit all of the state parks.

we had some but 2 thermacells seem to do the trick. I figured it would be way worse as wet as it is, but we got lucky lol.

 

I'm pretty sure you're gonna get pinched now for tampering w/evidence

 

Lol.

 

The Aquarium just emailed back for photos. I'm guessing that it could be the rear leg area of a Loggerhead but I could be way off.

 

Do all campgrounds have cement slabs on the sites for the camper/picnic tables in Texas? I haven’t been to a lot of different campgrounds, here I’m Pennsylvania, but the ones I’ve been to have stones for the camper.

 

It varies depending on the site.

 

Custom throttle body adapter plate made by @snivilous is on its way! Hopefully get this new blower installed after my work trips

 

Hauled a load of bark the other day and was very impressed how the RAS helped

 

Femur

 

I have an idea for the top of the boot so it looks like a cleaner fit. Now it is just folded under.

 

Ziptie lol

 

Human???

 

Its small, it came with the safe Jack

 

@STravis

 

Awesome! Time to get cutting!

 

Only if it can check all boxes with a bicycle.

 

Let me know what u figure out on that, I’d be interested.

 

Not all do, but there are quite a few that do. Our coastal area have a lot just to save on maintenance.

 

Left mine in the hands of a shop for the first time. Now I anxiously await the price and hope things are done to my liking.

Exhaust repair, alignment, spare tire leak repair, check slight vibration, etc.

 

Finished the Talons skid plate/cat protection install! Paula now has 100+ stamina, 200+ armor, 250+ against thievery. No change in magic defense.

 

Added tie down rings to the bed rails. Three on the sides, and two behind the cab. Now I can get rid of those clunky Toyota ones.

 

Finally no more exhaust leak! And the bill was less than anticipated.


On another note, something didn't feel right. After trying to figure it out I eventually smelled brakes. I checked the rear wheels and they were hot. I had them adjust the parking brake as I'd adjusted it at every point and it still wasn't holding. Apparently he had to get it so tight it was actually slightly engaged.

After the alignment I'm now getting a slight rub at full right lock on my skid plate. Time to trim.

As for the vibration, they're unsure. They thought maybe the tires, but it was there before the tires. I'm pretty sensitive to it and it may be nothing of concern. However, I'm going to check my carrier bearing. Could be a slight imbalance in the driveshaft too, but that's likely harder to diagnose. Could be a lot of things.

 

Finally pulled the trigger on one of these. I couldn’t see myself pay over $200 for what it is. Found it for for $70 and couldn’t be happier. Box feels solid, bracket is different from the swing case but all the bolt holes land on flat area of bed. For what I’ll use it for I’m happy with it. Only down side is you loose that tie down hook. I cut the bracket to be able to fit around the hook but the case doesn’t it clear it when closed. Oh well. Also I have drop in liner and had to do some trimming to make fit. Hopefully linex soon. Got quoted $650 out the door here local in chicago.
https://www.ebay.com/itm/2560165604...ssdVIeBTHi&var=&widget_ver=artemis&media=COPY

 

Took off the TRD decals, cause the edges had trapped dirt.

 

Put on the Rci engine skid plate. Way better coverage than the stock one.

 

I finally switched out my halogen headlights with these new OE TRD style Bi-LED head lights (black). Blacked out my badges and got A/T tires. Any suggestions on my next upgrade? I’m thinking about deleting my chrome next.

 

Finally ordered a mount from Bulletpoint Designs for my Furrion RV monitor. Using a Tackform vent mount for it.

I'm just not committed to the number of devices I'd need to justify a Rago mount. Might someday be handy if I could mount my Talkabout T605 for road trips. Maybe.