WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Looks great man!
I'm kinda biased on the color lol,get the chin done to it'll really tie that front end nicely.

 

Added a CBI Covert Bumper and a Warn Evo 10S winch. (The first project I've ever done like this. Really appreciate some of the threads on here with instructions.)

Forgot to put the parking sensors back in, but will fix that when I take the grill back off to add my light bar next weekend.

 

I did the same but used the grille covers from chromestoppers. Bought the painted flares from same folks, quality stuff.

 

Installed the Beat-Sonic PA2T3K Plug and Play Encore Alpha Power Amplifier for the JBL 12 speaker system. It made a very big difference, IMO. Sounds cleaner and I don't have to jack the volume up to 50 just to hear it.

 

I have one the amps coming the next couple of days. Just for the heck of it how did you adjust your gains on the amp?

 

Mine is coming today. I talked to beat sonic and they actually suggested wiring it over to the glove box so that you can change the gain if needed.

 

Turn both gain adjustment screws/ knobs clockwise until they stop. Then back them off until they are both horizontal (- -). The Youtube video of the Beat Sonic guy showing installation says it toward the end of the video.

 

how difficult was taking off the grill and putting it back on? how long did it take?

 

Can’t speak for Greg of course, but it’s honestly not a bad install… Looks worse than it is… Took me a few hours but I did it by myself while making a step-by-step guide for my channel… Here’s the video if you want to check it out, hope it helps!


CBI Covert Bumper, Install/Review on 2022 Toyota Tundra TRD Pro...Paired with Gear America Shackles!
https://youtu.be/NnTWLDxeSmY

 

Found someone local who took off the OEM Predator Tube Running Boards for $200.

 

That's a good deal considering the dealer charges $1100 for them.

 

I just installed my Beat-Sonic PA2T3K. Nothing to it. Easy peazy. Sounds better for sure. I put gain at about 2/3 of the way up. I tested it before I put it back in. It appears that the rear gain control does nothing and the front one controls everything.

Question. I have a 1794. There was a wire and clip going into the back of the trim piece you take out above the glovebox. It was clipped in to nothing. It is not for the lights or anything, it goes to nothing, just clipped into blank plastic. Anyone know?

 

Yup. It's for the Capstone trim. It says "CAPSTONE" on their trim piece and it lights up. So, the connector goes to that LED that none of the other trim levels has.

 

Figured as much. Thanks!

 

I'm swapping the pipe back to original. The rubber hangers have stretched allowing the pipe to contact the step resulting in a OCD annoying rattle at idle. I'll update once I modify dual tailpipe by denting or cutting/TIG the contact area. bummer.

 

Installed new Husky X-ACT Contour floor mats. Loving them so far.

 

I can't tell from your photos, was your tail pipe chrome? I'm looking for the black chrome version.

 

Just did this yesterday, great mats and better than the oem Toyota all weather mats that come standard up here in Canada.

 

chrome tips

 

Don't do anything rash,I had the same problem with mine hitting/rubbing against the bed step and it drove me frigging nuts.
Loosen it just barely enough to twist the pipes to maneuver it,place it to where it needs to be and "overcompinsate" for the rubber hanger to do what it's going to do over time.

 

Tried that when installing. Will give it a go again over the weekend. May loosen the joint at muffler, throw a worm clamp on the tail hanger rubber to limit movement then bolt it again. Otherwise, out it comes to be welded.

 

Had her first good freeze

 

Good timing for my first fill up. Black Friday gas price deal at $1.00 off per gallon at my local regular station ($1.93 gal)!
First hand calculation came in at 16.44 MPG so will see how this goes after further break in.

 

Installed these

Muslogy Premium Custom Interior Non-Slip Anti Dust Cup Holder Inserts 30 Pcs Set Center Console Liner Door Pocket Liners Compatible with Tundra 2022-2024 (White)

$27 Muslogy fits Tundra Accessories 2022 2023 2024 Premium Custom Interior Non-Slip Anti Dust Cup Holder Inserts 30 Pcs Set Center Console Liner Door Pocket Liners Compatible with Tundra 2022-2024 (White)

https://www.amazon.com/dp/B0B7DNM1Y2

 

Getting 295/70-18 MT Baja Boss AT's fit on a bone stock 2023 SR5 SX +60 18X7.5" wheels at Discount Tire. They said they won't fit. Rolling the dice! LOL

Brad

EDIT - They fit!

 

Installed my Diamondback HD on my new 2024 Tundra TRD Pro in Terra color

 

Picked up a 75 gallon tank and stand.

 

I have these as well. Love the non-slip feature and feels.

 

It really was not very difficult. I actually used Patrick's video (right below your question) as a guide. I was by myself taking it off and it probably took me an hour or less to get it off and back on. Getting the winch plate installed and the winch mounted in the right spot took the most time (a few hours). I ended up having to drill extra holes because the holes on the CBI winch plate wouldn't work because of the placement of the fans.

All in all it really wasn't that bad.

 

Installed the Carven catback exhaust. It’s a little louder on start that I’d like but settles in once the engine warms up.