1st Gen. Lunch Table - General Discussion

That sump pump could be an issue if there is standing water but they didn't dig the hole. Is there any vapor barrier put down?

That was my biggest f-up with my house. No vapor barrier and I have high humidity. I have a dehumidifier in the crawlspace now and one on my main floor because the humidity gets up to 70% without it. I plan on putting down a vapor barrier myself here soon, when time and funds permit. I received 2 quotes on crawlspace encapsulation; one for $30k and another for 11k.

 

Old vinyl my dad had on the truck for his a/c & power window shop (his mobile #) The "ghost" is just cause the clear coat is nicer and wasn't exposed to the elements all those years. Lol

 

Once again, sad it's a 2WD... 78k miles for $15k though.

​

 

That truck is SCREAMINGGGG prerunner

 

What is this truck screaming? ("HELP!")

​

 

"no daddy, no."

 

"My timing belt has never been replaced"

 

No, I don’t think there’s a vapor barrier and it’s probably the reason there was black mold on the drywall down there. The water marks on the foundation walls didn’t really appear that bad but they were still evident.

 

That should definitely be your #1 home project, especially if there is black mold present. That just means that there is more black mold that you can't see. That's a hazard.

 

I probably just wouldn’t build a room down there and just try to keep it dry with ventilation (there’s basement windows). I’d only try to make sure with an inspector that water is not getting past the roof and down an interior or exterior wall if they can inspect that.

 

I personally would not buy that place.

 

Does anyone have an active RA discount code?

 

https://www.retailmenot.com/view/rockauto.com

 

Thanks butt none of those codes worked

 

What do you mean "didn't work"? You don't get any confirmation if it works or not. You're supposed to enter the code in the "How'd you hear about us?" box!!

You'll see the deduction when they bill it later, and mail you the receipt or whatever. It doesn't work like normal stores. They're just a mom-and-pop-shop.

 

Usually it'll show on the receipt the email you. It didnt show on that receipt.

 

I don't think I've ever seen that, but I always see them charge me less on my card.

 

Well I will montor my bank statements then...

 

I still have factory ball joints

 

Weird, one of them worked for me. Just shows up under the shipping total after you enter it.

 

Living on the edge? Make sure you post your ball joint failure on Facebook with the rest of them.

 

he's referring to this truck

 

https://youtu.be/hFTdskQth9s?si=o2hNMRECyrqtTmy3

Interesttinnngggggg doesn't apply as much to me due to me using flux and I run the highest settings I can get away with on thicker material. But for you MIG guys

this guys voice is also the best for narrating lol

 

Save me @BroHon or @Jack McCarthy

 

Molested. Lost cause.

 

But what if it has a clean frame?

I want the cap.

 

Good point. Plus the fact I have nowhere to keep it for now. *Cap sold separately.

 

I just noticed MT's up front and what looks like AT's out back???!

 

Oh shit