WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

I’ve been running the rokblokz for about 1 year now and I love them but it’s all personal preference

 

Nice and easy install too. Also like that you get the option to buy an xl size

 

I HAVEN'T DONE ANYTHING TO MY 3RD GEN TUNDRA BECAUSE I DON'T OWN ONE.

Sorry. First time seeing this thread and I wanted to match the energy.

 

What did you install the original or the xl’s? Do you have pics?

 

I got the original size and yea I think I got a couple that I posted

 

OEM marker lights!

 

Thanks for the pics. It looks like with 285’s and 18 offset you have about the same tire poke as I have with 315’s and 20 offset. I would probably go with the xl’s if I get the Rokblokz. I’m just wondering if I will have tire rub like this guy?

https://www.tundras.com/threads/terrible-experience-with-rokblokz-customer-service.150109/

 

285 60r20 20x9 12mm offset

 

and I haven’t had any issues with rub at all. That’s with a 3.5inch rough country kit and also with my new setup for 3in ims dobinsons lift. I get about 1.5inch over stock and Still no issues

 

My tires being 34.4” will be close, I’ll probably give them a try though I don’t want to run without mudflaps. If my tires rub I can sell the mudflaps here

 

just buy some flat head screws from Amazon in the same size as what are included with the mudflaps brother to give you that extra space. Problem solved

 

Yes, black ones

 

I have also beeen running Rokblokz since getting my truck in 2023 and they are great.

 

New Toyota owner. Coming from Jeeps and most recently a 2021 Ram Laramie 4x4. Loved the Ram, but really love the Tundra.

Been lurking here for a while before I bought my 2024 Limited TRD on 31OCT24. I'm currently on page 220 of the 267 pages of this thread.
Getting through it and making my lists of future purchases/builds. Lot of solid looking trucks!

So far:
Ceramic tint all the way around (minus pana.roof)
TuffSkinz center console insert (should have been factory installed) and Grille TRD and TRD colors
Screen protector
OEM bed cover
Fitted bed mat
2 TRD air filters
and just today, I installed the Blackout hood wrap from Rumble Wraps.

I watched all his videos and installed myself. Super easy and came out great. (I did the dry install)
Rumble wraps is GTG! Great shipping in super thick cardboard box. The vinyl was wrapped around a sturdy cardboard tube, with square plastic end pieces to ensure the wrap doesn't move at all in the box. He also put a center plastic piece in the middle of the shipping box bc USPS & UPS suck and squash things. I don't know the crush weight of the box the vinyl was sent in, but it would have taken quite a bit to damage the wrap inside! They did a great job in shipping and material.

Next up is either a Covert front bumper or similar bumper with tow hooks (also should be a factory piece of kit).
Tires/small lift down the road.

Before and after pics:

 

Removed my mud flaps and the tires rub the felt liner in back. Looks like I will need to pin the liners back and run without mud flaps

 

I've had the RekGens for a year now and been happy. They fit well (with some adjusting) and work well. WAY better than the OEM flaps. Looks like they're a better setup than the ones shown in that Tacoma thread. That said, I am at full outward adjustment for coverage with my summer wheels/tires (Method 707 +18 with 275/70R18). I have excess coverage with my OEM wheels with 275/65R18 in the winter though.

 

Used it to take the dirt bikes out for a ride.

Loving this truck even more. Pulls great and looks good doing it.

 

[/QUOTE]

 

[/QUOTE]
That looks great!

 

Added bump switch to the passenger side, waiting on the harness to be finished. Ordered a switch and bezel for drivers side and did a little engineering.

 

How many screws did you get on that switch?

 

None, just used 2 that were a little longer. On the bottom, had to put a thick spacer under the tab so that it moved the bezel back a little. The photos I copied from a guy on Facebook that did his, instead of washers I used a spacer that was thick enough. I went through 2 bezels doing mine. Bottom will not align perfectly. If I could have cut the factory bezel that would have been the better option, tried and it looked like shit. Unless someone could router it out or 3d print one that is like the actual passenger side, instead of engineering the drivers side to work on the passenger side.

 

WOW! That's alot of work, I rarely even use the switch on the drivers side. Good job though.

 

@machd08 I was under the impression that you could just pop the fake button out of the passenger side and slap the switch in there...no need for another bezel. Is that not the case then?

 

Replaced my ugly gloss black center console with a topograph one.
Added a holster for a squirt gun.
Put on a cute little tri-color badge on the grill.
Dont know how to add a vid clip of my holster, so i guess it's just a zip file to dload, it's not a virus I promise.

 

Is the console a sticker or an actual swap? I don’t mind the gloss black but looks like it’ll show swirls rather easy. Was thinking of looking into other options.

 

what headlights are those? I think I was looking at similar ones but read that they dont last long.

 

I found this on Amazon, looks amazing & it's excellent quality. $15
JDMCAR Central Control Gear Shift Panel Trim Cover Compatible with 2022 2023 2024 2025 Toyota Tundra/Sequoia Accessories, Gear Shift Control Anti-Scratch Panel Decorative Sticker -Matte Black https://a.co/d/09oiT6p