Side mirror connector pinout info

I am looking to add an LED to my pillars for BSM indicator when I change out my mirrors for tow mirrors. Does anyone have the pin out for this connector by chance?

 

I used this layout when doing the power folding mirror mod on my 2014 Limited. Got it from TundraTalk.net:

http://www.tundratalk.net/forums/tundra-lighting-electrical/439441-2014-sr5-platinum-power-fold-mirror-install.html

Pin 1: Heat +
Pin 2: Heat –
Pin 3: Signal – (Running Light -)
Pin 4: Signal +
Pin 5: Puddle Lamp – (Already wired as common ground, needs rewire to make puddle lamps work)
Pin 6: Puddle Lamp +
Pin 7: Mirror Retract (+)
Pin 8: Mirror Fold (–)
Pin 9: Running Light +
Pin 10: Mirror Vert (power)
Pin 11: Mirror +
Pin 12: Mirror Horiz (power)
Pin 13: Auto-Dim –
Pin 14: Auto-Dim +
Pin 15-18: Memory Pins

 

Thanks! This just saved my ass trying to hook up Halo DRLs to the mirror signal Circuit.

 

I’d love to eventually do this to also add puddle lights, arrow signal lights and power folding

 

Do you remember where you got this connector? Ours (on driver side in the door) corroded and needs replaced but I can't find one anywhere. Thanks in advance!

 

Looks like some good info here, if I decide to go ahead and add tow mirrors. Thanks for posting.

 

This is great info guys Thanx. I installed a pair of heated power mirrors and my running/signals were wired opposite. When the running lights were on the driver's side was the top light and the pass side was the bottom. It was an easy wire reversal once I had the stock plug wiring diagram.

 

I just got tow mirrors. Can you guys help me on how to make the tow mirror outer led lights and blinkers work? I have a 17 limited and the BSM and power works. Just the outer LEDs and blinker for the out LEDs do not work. What is the process to fix this? Thanks.

 

Yes I just installed a set of 1A auto tow mirrors on a 2018 SR5 Sequoia, heat and BSM are functional but mirror clearance light and blinker are non functional currently.
Besides the plug diagram and the pin out listing, does anyone have the wiring color coding for the plug that is in the door that plugs into the mirror? Thanks

 

Im putting Switch backs on my chevy Style tow mirrors and when I put the wire to the running lights (pin 9) my fuse just keeps popping...any input would be great

 

Lots of posts on this. The diagram and the post listing the pin out is mostly correct. The question is, is that’s the Pin our for the mirror you have or the mirror you getting, and same for the truck (year) you are installing.

I had to switch two wires to get my BSM to work start on post 228
https://www.tundras.com/threads/upgrading-to-power-fold-mirrors.12452/page-8#post-1444316

 

FWIW...

A super easy to test the pin on the mirror to identify what does what...

Used the above pin out info to help identify what wires did what with a 9 volt battery.

you will see the bsm light up
You will see the auto dim
Your will see the blinker work
Puddle lights as well
And you will hear the motor try to fold and open (battery too weak)

It’s a backyard way but it works..

 

Does anyone know what type of wire connect (molex) to use for the pin out on the power fold mirror. I need to insert the male socket into the connector to plug into the mirror connector to get the power fold option to work. I just don't know what type of male terminal to use for the connector

 

Hi! Same issue here where I need to swap 9 and 18. Can someone show me how to swap the pins. Does the harness open? How? The wires are firmly in the harness so I’m assuming you don’t just pull and plug?

 

https://www.tundras.com/threads/ultimate-tundra-wiring-diagrams-collection.81448/

Check out the attachments in the General Manuals and Info section

 

It is like this but on a smaller scale..

https://youtu.be/RQjIE8m2sQs?si=h2cL7RbQ0F87UH5m

Gonna be pretty close to this, video starts where you need it.

https://youtu.be/Vt_rAIKPlWA?si=6nLP15W8iYod6Ld2&t=917