Driver's Side Firewall Grommet For A/V Cable Into Cab

I need to run a small AV cable from the engine compartment into driver's side footwell area.There is lots of info on using the passenger side grommet but not much regarding the one on the driver's side.There is no "nipple" available like on the passenger side.Can I make a small cut in the grommet and pull the cable through with a metal coat hanger for instance?Thanks for any advice.

 

Yeah you will be fine running it through there. Just don’t poke or cut any of the wires on the harness.

 

I did for a front cam.
https://www.tundras.com/threads/front-cam-install-for-phoenix-android-hu.22363/

 

Thanks ZPMAN for that link.EXACTLY what I was looking for.

 

Did you get a 2nd gen Phoenix HU?

 

There is a nipple. But it’s at the bottom, not like the passenger side which is at the top and visible. Driver side is under the main harness going into the cab.

 

You can also use something like this. Makes for a clean, and easy install
GiBot Cable Glands - 25 Pack Plastic Waterproof 3.5-13mm Cable Glands Joints Wire Protectors, PG 7/9/11/13.5/16, Black https://www.amazon.com/dp/B0748JLNR4/ref=cm_sw_r_other_apa_i_dM71BbW2D7SNB

 

Nothing that fancy.I got a cheapo forward facing camera.
https://www.amazon.com/Auto-Vox-Par...s=auto-vox+m1+4.3+tft+lcd+backup+camera&psc=1