Stickers on the side of the bed.

my truck is a 2014 1794 edition that came without any stickers on the side of the bed.
I wasn't sure if this is the way it was put together or the previous owner peeled the stickers.
what is your thoughts?
Thank you

 

Matt @DecalsByDesign
can make you whatever decal you want. Reach out to him.

 

Much appreciated
My concern is to know under what specifications my Tundra would fall.
Hopefully someone will chime in
Thank you

 

Are you talking the TRD sticker? I'm not sure the 1794 package come with them.

 

The 1794, platinum, pro, limited and SR5s do not come with bedside stickers. Just the trd offroad and trd sports, and some special regional edition trucks like TSS have them. you can get a 1794 offroad and maybe a limited w/ offroad package, which do come with the beside offroad decal I believe

 

Besides decals are a very bad way to determine what model truck you have anyway. You can put a sticker on anything, or remove it.

 

Just wanted to know and satisfy my curiosity.

 

The regular 1794 didn’t have any stickers. If you have 18” wheels and yours is a trd off road there should be a trd off-road sticker. I went ahead and got @DecalsByDesign to make me a custom one since platinums didn’t have any stickers.

Check this thread out for ideas

This is what he made me.

 

My Limited is a TRD off-road and did have the stickers.

 

Like the others mentioned, Matt is your man for bedside decals.

I wanted my decals to pretty much "ghost" into the paint when looking at the straight on from the side. When you change your viewing angle they become noticable. It took a couple tries to get it right but Matt pulled it off.

 

I like it! Matt made me some matte blacks stickers to replace the stock.
I definitely recommend @DecalsByDesign

 

1794 isn't offered with the TRD option so no TRD sticker. I don't believe the 1794 got anything more than a 1794 emblem.

 

I got factory bedside decals. Anyone know if they are clearcoated over or if are they easily peelable?

All searchable threads seem to be focused on new decals.

Stockers look like nightmares to remove.

Apologies for the hijack.

 

They peel off. It can take some work but not terrible. Some heat and patience. I used a vehicle specific 3M adhesive remover to get the rest of the residue and ordered what I wanted.

 

They peel off with some heat and effort. No clear over them. The sooner the better as far as removing.

 

Maybe that is the deal with the 1794.
Thank you

 

Did the 2014 1794s not come with the TRD package? I know they do since 2018 at least.

 

It is the deal. The 1794 does not come with decals on the bed, unless you added the trd offroad package

 

Eraser wheel that attaches to your drill and goo gone do the trick. Did it for my pinstripes

 

@Pudge @BTBAKER Thanks for the advice. Much appreciated.

 

https://www.beavertontoyota.com/new.../2019-toyota-tundra-beaverton-oregon-35425561

 

I think some 1794s could be, or maybe still can he had with the trd offroad package

 

OP has a 2014

 

I truly like how this turned out.

 

Apparently I needed to read the rest of the sentence in your post.

 

Just to cure my curiosity. @zebian2 what size wheels does your truck have? If they are stock.

 

Stock wheels are 20”

 

Here’s the ones I had made by @DecalsByDesign

 

Also I ended up with another set of 18” wheels & tires (new take offs)
That I’m planning on using
They’re both have the same circumference