Help on removing these to wrap

Anyone know how to remove the 3 pieces on the dash? I want to wrap them. Not my tundra in the pic.

 

The ones on the passenger side just pull off.
Remove the end piece and pry them off with a plastic tool.
I think the one on the driver's side is the same, unless you have to pull the panel underneath it to get both sides of the driver's side off.
Someone else will chime in I'm sure.

 

@1lowlife thanks!

 

I just went out and checked it.
The pass side pieces just pop off.





The driver's side pieces have a lip on the bottom so you'll need to pull the bottom piece out enough to clear the lip.
You can remove the bottom piece, remove the kick panel and two bolts, or just pop the top edge of the bottom panel out enough to clear that lip, and then pop your pieces out.











Something like these come in really handy if you don't already have them..



https://www.amazon.com/GOOACC-Remov...eywords=interior+tools&qid=1581376154&sr=8-16

 

@1lowlife thanks soo much! The pics are great! Going to tackle this tomorrow afternoon. You made it alot easier!