Straight-Pipe Cost on 1st Gen Tundra

I am looking into straight piping my 01' 4.7 V8 Tundra and was wondering if anyone has an estimate of the cost of it. I live in California, more in the Sacramento area, and am wondering if anyone in or around the area has had any sort of muffler/exhaust work done and how much it cost them.

 

Please don't. Unless it's towed to a track/offroad facility only.

Your hearing will thank you.

 

^ @assassin10000 is can’t be that loud, a little 4.7L

 

I carried a bag of earplugs in my 1.6l & 2.0l cars to drive them more than half an hour. And thats with a car and some kind of muffler.

 

$486 Patriot Exhaust H1060 60" Chrome Side Exhaust Silver

https://www.amazon.com/Patriot-Exha...gid=pla-570726951765&ref=&adgrpid=64728043880


https://www.lethalperformance.com/j...E20zjZUy9uVucF7UFbv5iWOwl2V9n5asaAvJvEALw_wcB

$24 JEGS 2.5” OD Aluminized Exhaust Tubing | 4-Feet Length | 16-Gauge | Seam Welded | Straight | Heavy-Duty Construction

https://www.amazon.com/JEGS-30610-A...t=&hvlocphy=9052988&hvtargid=pla-569013351066

https://www.zillow.com/homedetails/0-Turpentine-Ln-Shirley-AR-72153/2067560383_zpid/

I forgot the important bits:
https://www.kelfordcams.com/global/...uz-3uz-vvti/kvs1uz-valve-spring-set-3585.html

https://www.kelfordcams.com/nz/208-c-camshaft-set.html

https://xatracing.com/JE-UZ-Pistons.html

https://www.suprastore.com/eauzfocoroso.html

 

Haha, give the people what they want, Lol! Sirfive aint no straight pipe police! That's a beautiful spot in the last link. Are you moving there to get away from the noise?

 

How will you ever register it again?

 

A quick search said arkansas doesnt have emission tests.

 

So i had an 05 tundra before and i had the muffler cut out and replaced with pipe. It is much quieter than you think. I was only 21 at the time so i did like the noise, but as long as you have the full tailpipe, it had a little resonator in the stock pipe and it really was a nice setup.

 

To have a shop cut out the muffler and weld in about 3 feet of pipe is under $100

I would at minimum leave the resonator on. It doesn't hurt performance or sound. Its only effective up to around 2300 rpm, after that it does nothing. Your cruising speeds will be easier on you.

 

I added some stuff. I forgot how weak the engines sound straight piped stock. You’ll need more than 400 whp before it wont be disappointing.

good:
https://youtu.be/AKYg6H7yh3k

Bad:
https://youtu.be/gOL0h3QCtlo

 

I don't see a link to any LS motors

 

OK.

I am considering similar mods for my SS:

https://youtu.be/-u8ISIsg9F4

Talk me out of it.

 

sbc’s sound better.
https://youtu.be/pNTh6sRnYlM

 

I'm biased to the sound of little pissed off beetles. This one is surprisingly quick considering its barely a 1.8 liter

 

If you leave the full OE tailpipe on the 4.7 it sounds better than a shortened pipe

 

I personally like angry kazoo’s
https://youtu.be/Kj5_Jyb3WKU

worlds best leaf blower.

 

You gotta get that woo WOOOOO

 

Ah yes the whistle tip!

 

That car just needs a 4 rotor.

 

I though he said he lives in NorCo

 

My coworker who also drives a 1st gen Tundra had both of his cats chopped off in the parking lot. Yes, both. He had a random shop weld in some pipes for less than $200.

He says he gets more torque off the line. Extra bit of "skrrt."

 

It’s a lot of skrrty going on!

 

No cats?! Dirty skrrty

 

111 dB? That's fucking obnoxiously loud. Like tacuache loud.

 

? I didnt watch the vids. Made my judgement within 10 secs.

https://youtu.be/x6RGIebnnzk

 

The first one sounded great, 2nd one was loud just to be loud. There's a difference between good loud, and loud just to be obnoxious. I prefer the first. My SHO is probably around 95 dB, and it's loud enough, but sounds like raspy ass with its generic turbo mufflers on a transverse v6.

 

I wish i knew how to make a 2uz run on carbs. Blower surge on a street car is a life style.

https://youtu.be/-tCabjBtvZY

 

So that’s what’s going on

 

The guys that have it, dont want it. And the guys that want it, cant get it.

https://www.enginelabs.com/news/tech-quickie-cool-not-blower-surge/