General Supercharger Thread

LMAO

 

That will go well with my wheels and suspension lol

 

Shit yes that’s sick. When I redo my kings probably something like that

 

Do it! Yah! Something different from the King Blue lol

 

Just some kapton and mylar away from going to Mars

 

Just hit a gold mine, no pun intended at work. Found this roll of NASA grade gold wrapping paper in a mechanical room. I’ll start the bidding at a set of new 5.29 gears.

 

Hey, with the 2/4 lowering kit, and the s/c installed, are you also running the front TRD Skid Plate? Just curious about the extra weight on the yellow bilstien shocks from sos

 

No skid plate, no. I do have a ton of extra weight between all the amps and speakers though and all seems fine.

 

Cool, thanks. I'm installing the setrab trans cooler right now and had to remove it for the install. Leaving it off until after lowering kit install next, but was debating about putting it back on in the end. Probably will

 

lmao

 

Drove a ton today and 10-15 above ambient. Ambient ranged from 68-88 today

 

Where is your air temp sensor located?
And is it the same place as Harrop air temp sensor?

 

I believe it’s not the same as the harrop. I think it pulls from the maf.

 

I believe that's correct. you are seeing the temp at the MAF sensor. 10-15 is OK

I would run just south of that when I was bone stock. HWY driving would sometimes be as low as 5 degree delta.

the Harrop sensor is after boost - just before entering cylinder. Us Harrop boys see 20-40 degree delta. (~70degrees when you intercooler pump is not plugged in)

I suspect the Mag is just north of that delta because you guys spin faster & have smaller intercooler.
however, you guys appear to make boost faster because of your fast spinning.

 

I would definitely agree with that. The harrop is much more efficient in making boost. From previous logging my efforts do seem to be working. Why wouldn’t they since its NASA tech lol. But it could be working because the earth is flat lol

 

I will surely follow if your technique works.

 

Think I've decided I'm gonna piece together my fit kit instead of buying the TRD fit kit. You guys start throwing me links to parts so I can save em lol. Also gonna copy you with the tin foil hat stuff

 

Will do!

 

Johnbond performance- he may have a fit kit or head unit.

Aluminum Resi tank
https://shopfigs.com/v5/L1030

Walbro 450 fuel pump- if you plan on going smaller pulley or just want more cushion of fuel.

 

Earth reentry will be a breeze

 

Funny thing I was going to "Go for the gold!" but now I regret it. Mine looks like someone threw a bunch of burger wrappers in my bay.

 

Just noticed Figs is only 35 minutes from me. I may have to just swing by their place and see what they got laying around.

 

hahah just Wendys wrappers all over lol

 

Don't tempt me. I want to see the face of the tuner working on my truck when they open hood.

 

Got a kick out of this channel:

https://youtu.be/d87svo4ELuU

https://youtu.be/L2mfB--UamE

 

Do you have a link to your gold Wendys wrappers?

 

So here’s what I ordered below.

Intake box- from Amazon I got two boxes but only needed one. But get two just Incase to layer more.
Adhesive Backed Aluminized Fiberglass Heat Sheet Heat Protection Barrier Cover Aluminized Heat Shielding Mat for Hose and Auto Use Heat Insulation Sheet Heat Reflective (Gold, 24 x 48 Inch)

$16 Adhesive Backed Aluminized Fiberglass Heat Sheet Heat Protection Barrier Cover Aluminized Heat Shielding Mat for Hose and Auto Use Heat Insulation Sheet Heat Reflective (Gold, 24 x 48")

https://www.amazon.com/dp/B08GG22QHC



Intercooler line wrap- from amazon (Qty 1) you cut this to size per line.

Heat Shroud Golden Sleeving Heat Shield fuel line wire heat sleeve 1-1/4''I.D. x 10FT with 20 Pcs 7.8Inch Stainless Steel Cable Metal Zip Ties

$26 Heat Shroud Golden Sleeving Heat Shield fuel line wire heat sleeve 1-1/4''I.D. x 10FT with 20 Pcs 7.8" Stainless Steel Cable Metal Zip Ties

https://www.amazon.com/dp/B09XMBRCXS

 

Prepping my parts links to piece together fit kit for TRD Magnusun s/c. Question about the injectors and pump. From an ease of purchasing standpoint I'm looking at the Prospeed Fuel system package which includes 750cc injectors and TI Auto E85 450 fuel pump w/install kit, for $890 after shipping. Worth it? Or buy better brands separately?

https://www.prospeedautosports.com/...ra-fuel-system-package?variant=36758875537574

 

What would be nice is if someone could figure our how to run a AC line to the CAI?? Or Run a vent around it and turn your AC air max circulation?

 

Look at KillerChiller:

https://killerchiller.com/shop/ols/products/toyota-tundra-tacoma-kc-system-gen-3-kit-all-years