OBD 2 Port Splitter

I am trying to have my Ultragage and Veepeek simultaneously plugged into the OBD port so I don't have to switch them out and I wanted to have a switched splitter so I can switch between the 2 without removing anything. Will this item below do that?

https://www.ebay.com/itm/332904437759?epid=2029457064

 

Should be fine. I’ve been using this one for a year or two with no issue, running my Maestro stuff and OBD Fusion at the same time. I feel like there’s something else hooked up but can’t remember what.. maybe remote start?
OLLGEN OBD2 Splitter Cable,OBD-II Extension Cable,1 Male to 3 Female Car Diagnostic Extender Cord Adapter,16 Pin Right Angle,1.6ft/50cm

$15 OLLGEN OBD2 Splitter Cable,OBD-II Extension Cable,1 Male to 3 Female Car Diagnostic Extender Cord Adapter,16 Pin Right Angle,1.6ft/50cm

https://www.amazon.com/dp/B01AUJH01M

 

So are you getting data packets sent to each at the same time or are you using them just for power?

 

I’m 90% sure both work simultaneously, but let me double check in the morning. Someone else may be able to chime in before then though

 

Thanks. I always thought it won't be able to actually communicate vehicle data from the ecu to 2 separate modules, but can definitely power 2 things with only 1 getting ecu info.

 

https://www.amazon.com/bbfly-B6-Splitter-Extension-Female-Adapter/dp/B071L8W7Q7?crid=2UASG5UQNTPOD&keywords=obd+splitter+2+way&qid=1678071539&sprefix=obd+spli%2Caps%2C138&sr=8-2-spons

This is the one I’m using for my Garmin Mini dash cam along with my OBDLink MX.

 

Update today I installed my Ultragage and Veepeek together at the same time using the splitter and to my shock both were able to communicate simultaneously. Awesome.

 

Crap! I totally spaced on checking that out. Glad you tested it and it worked though.

 

For 15 bucks I rolled the dice. Great find. Now I need to tuck all the wiring and such.