What have you done to your 2.5 gen Tundra today?

Nice! 900,000miles to go!

 

Wiring from roof rack. Mag Daddy is convenient.

 

New high score!! I'm right behind you..only 3k left!!

 

You have a 10 year old Tundra and still haven't passed 100k? You need to drive that thing more!

 

Get some flush cuts for those zip ties.

 

Those is theft prevention. If someone wants that, they gotta earn it.

 

ordered the MESO Volume Fix kit!

 

Mine delivered Monday, three days after I left for a 9 day trip.

 

I installed the MESO-Custom's steering wheel volume fix, blackout trim and the center console blackout kit. Trying to drill out the plastic welds on the shifter surround was a pain, so I used the oscillating multi-tool. Was able to pop the shift gate trim out, but it needs some help staying in place. Had to pick up some epoxy and will glue it down when I get some clear matte spray to dull the shiny plastic that remains. I should have gotten some blackout or red toyota logo for the airbag part.

I wonder why nobody has come up with a mod to put Gen2 sized cup holders as a retrofit, I really hate how small the cup holders are in the Gen2.5's. Hell, my Acura MDX could hold my 32oz bottle in the door or just barely in the console. This isn't even close.

 

Looks great!

I haven’t seen anyone with this on the forum yet, but apparently AJT Designs makes one…pretty pricey for what it is…

$56 AJT DESIGN Oversized Cup Holder for Tundra (2014-2021) | ABS Plastic Cup Holder for Tundra - Black | Oversized Cup Holder for Vessel Diameter of 3.8” | Full-Length Side Cutout for Coffee Cup

https://www.amazon.com/dp/B0CTKM888B

 

They actually sell a plastic weld. When I did mine I didn't drill them. I was able to separate it and I had parts of the plastic rivets remaining so I melted them with a soldering on to reattach it. Amazon has emblem overlays for the steering wheel.

 

I see your truck is almost broken in!

 

Disconnected the negative battery terminal to install a 4ch amp to replace the god awful non JBL OEM junk... Ran all power and ground, connected everything to the amp (outside of the actual factory radio, I have not connected there yet) and now after reconnecting battery, I'm getting 3 faults... Trailer brake error, manual brake override error, and pre-collision system error.... All saying take to dealer. I'm about a month left on the warranty but I generally do ally own work. Any thoughts?? Am I posting in the wrong thread?

 

You can always go this route... Most of us have done this mod, and it'll hold a hyrdroflask, nalgenes, etc. w/ease

Chalk bag 32oz cupholder mod

 

Supercharger / radiator / catch can

 

Where did you tie the remote turn on (blue wire) to and I'm assuming you did a homerun routing for power and maybe the ground?

 

Yes sir!

 

There is a printable one on thingiverse.
https://www.thingiverse.com/thing:5140098

 

It's not that important, I have a couple of 20oz bottles as well as a 3D printer, I just haven't bothered to print on in PETG and I don't have an enclosure or anything other than PETG that would be suitable for use/keeping in a vehicle.

 

I sliced that one and made it multicolor, so the top of the TRD inside is red. I think it was going to take 16 hours or so, and I didn't want to bother with it right then.

I'm using a .6 nozzle in my Prusa Mk3, and torn between upgrading it to a 3.5/3.9/4 or just getting a Bambu Labs one, so I don't print much lately.

 

Yeah, I saw that mod, pretty ingenious. I have some brass bags for my range bag that hold my 32oz bottles easily, but the place that made it in CO has gone under. I don't know if the CEDHK ones are big enough. https://www.cedhk.com/ced-ammo-brass-pouch

 

The remote line is connected through a T-harness which isn't plugged in yet. I didn't have time to finish the job yesterday. Power comes through firewall "nipple" on the left side of drivers footwell, ground is chassis grounded under passenger seat where amps are. Currently non-jbl amp is bypassed through a loop harness, new 4ch amp is wired into power/ground but not radio. OBD code reader found no codes dealing with anything brake related... (Coincidentally it did tell me that I left the gas pedal unplugged and fixed that... Doh.)

 

Bought the lease out last week, feels great getting that done.
Today, finally getting around to sound deadening the front doors, I did the rears probably two years ago. I don't have a system, and listen to FM radio, so I am not doing speakers, just the deadening and fast rings around the 6x9's. It's more for road noise, and the sound when I close the doors, nothing more satisfying than that heavy clunk. Don't think I'll ever get to the roof, or the full floor done, although the floor is much more likely. Of course as I get it about 80% done, it starts raining three hours early. Should have a break soon to finish up.

 

NICE!
I was all excited yesterday when I caught this one...

 

It is an Amazon bar. I had a light bar in the bulge, but it was terrible with the mods and 18-wheelers kept ripping my bulges off the truck so I went back to stock and installed this beast.

This lightbar is unbelievably bright.

$96 Rigidhorse 42" Curved LED Light Bar, 300W Super Bright Flood & Spot Beam Combo - 52000LM Off Road Driving Single Row Light Bars for Trucks for Jeep Trucks Boats ATV UTV Cars

Amazon.com: Rigidhorse 42 Inch Curved LED Light Bar, 300W Super Bright Flood & Spot Beam Combo - 52000LM Off Road Driving Single Row Light Bars for Trucks for Jeep Trucks Boats ATV UTV Cars : Automotive

 

Backflip MX4 and Fox Mission tailgate pad

 

Unfortunately, going to wash Moab off my Tundra tonight and get it ready to pick up our new-to-us travel trailer tomorrow. Found a good deal on a Coleman 2125BH 26 footer.

 

4000 mile round trip in 9 days. Avg 13.6mpg with speeds between 75-80mph. Radar cruise is the greatest thing ever. Now to install the meso volume control fix and sdp exhaust on Wednesday before a small 200 mile road trip Thursday.

 

What dash cam should I get, just looking for front cam since I have a topper.