General Supercharger Thread

Get this man a dragy

 

Once that grin wears off then you'll be jumping to injectors, pullies, traction bars, exhaust, meth, NOS and custom tunes! Welcome to the club

 

My Wife does not know the Sequoia nor the BMW have boost.

 

What BMW you got? I have the E31 with V12 and Dinan turbos on it Another beast in my garage.

 

M70 or73?

I have an e36 Z3 with newly rebuilt S52 & full Z3M retrofit.

 

M70. They don't have any boost for the M73 as far as I know.

That's a nice machine there, e36 Z3

 

8 series are gorgeous. I got it fully functional in late March, just in time for the weather to never be under 90. Makes it hard to enjoy a convertible.

 

Those with those Lexus coil packs how’s it been?

 

Perfect.

 

Operating normal and haven't had any misfires.

 

Can I use the orange/red dongle with my TechStream? The shop left it in my glove compartment which is a good thing.

 

You can.

*Edit - I should say if it's the Tactrix based device that Magnuson supplied. If they are supplying their newer WiFlash device it will not as this device is not J2534 compatible*

 

I just landed in Plano with my baby that sat in Denver since March!

 

I couldn't decide between the M8 Competition and a S63 AMG. I ended up finding an edition one AMG E63s with extremely low miles. All great cars!

 

Anyone in here running the gates K081153HD belt? I currently have the K081177HD but now switching to a 75mm pulley the tension seems on the weak side. When I pulled the 77.5mm pulley off it appears to have belt dust around the inside of that pulley.

 

Which supercharger?

 

Harrop

 

I couldn't get the 1153 to fit on mine, I ended up going with https://www.aftfasteners.com/poly-banded-v-belt-belt-k-poly-v-0-14-x-116-75in-oc-8-rib-1-pkg/, and that one was hard to get on...lots of cussing and bloody knuckles.

 

And this tool for the tensioner, using a breaker bar didn't allow me to get the tensioner cranked enough unless I removed the fan and radiator hoses

$19 CRAFTSMAN CMMT98279 CRFT SERPENTINE BELT TOOL KIT

https://www.amazon.com/dp/B09KP2HT43?ref=ppx_yo2ov_dt_b_product_details

 

Thanks. Was looking for a tool to keep in truck with a spare belt. After loosing a belt and overheating I don't want to deal with that again.
I also removed the lower lip of the fan shroud, makes it a bit easier for belt tensioner and crank pulley. Hose is still a pain.

 

Recently, my Trd exhaust started to sound different, in a good way

well, the gasket things are about gone

Before I attempt to replace the gaskets, I’m gonna see how good this gets

 

Is Lexus one an upgrade?

 

Yessir

 

edit: found the link.

This is why I sometimes avoid reading this thread, everytime I read it, I always ended up buying something.

 

The biggest thing that stood out for me concerning the Lexus 8AR-FTS coils is they were designed for a forced induction engine.

 

I received the intake spacers from Anderson Engineering. I ordered the aluminum version, and they look pretty good...minor issues like two of the holes aren't anodized, and there are provisions for the gasket "nubs" to stick out that weren't machined all the way on 3 of the cuts, only one was done all the way through. I still need to get the measurements on the Harrop bolts so I can order longer bolts to install the spacers. I already bought the Gates K081196HD belt, so hopefully that works. Other than that, I just need a weekend without triple digit temps...

 

Definitely watching this. Any plans for pre/post dyno for torque increase?

 

So this site under the manifold then manifold on top. Interesting these not two gaskets? one on each side?

 

Gasket on the spacer goes against the head, then the gasket on the blower sits against this. So it is two gaskets, similar to a "normal" TB spacer that only includes the gasket on one side, since the other side gasket is on the blower snout.

 

Gotcha makes sense totally forgot about the one on the manifold lol