Anyone have the Eibach TRD-PRO-LIFT on their Pro?

https://eibach.com/product/E30-82-096-04-22?epsid=3511

Easy enough to just switch out a set of springs. Looks like a better option than Wescott in terms of ride comfort?

 

I emailed them a list of questions before I commit to buy. I'll share my findings when I hear back.

 

I have the Eibach PRO spring set inbound and hope to install next week.....will share pics once installed. Adding UCA and rear track bar to ensure alignment will be good....

 

@SnowToy

Did you get the 2.5"/1" kit? I measured my current height and that would make the truck nose-high. I assume some settling, but it wouldn't settle enough to level. I'm thinking the 1.5"/1" would be closer?

Also, why the new UCAs? Eibach says the OEMs are fine.

 

I did get the 2.5/1 springs - and agreed that it may make the nose a bit high... will toss in a spacer in the rear if needed...

I did the UCA's and rear bar as I'll eventually replace this setup with a set of adjustable Kings and Dob rear springs.... then sell the TRD Pro plus Springs and yota UCA as a full setup.

I just needed to get the truck lifted quickly for the 37's inbound...Kings are out a month plus for shipping I gather. and will do brake lines, Kings rear swaybar links and some other stuff....

Hope to have the interim setup sorted out by next weekend..have a batch of biz travel to take the rig on...

 

sigh...i was looking at this, but the nose up is a deal breaker for me. I tow periodically so I rather have a level truck or rear slightly higher unloaded. Nose high is just weird. Their kit says it levels the truck, i guess false advertising? Appreciate the review. This was helpful in my decision making.

 

They offer a 1-1/2" front lift spring as well FYI.

 

I'll post pics hopefully next week once the kit is on and the 37's/ SCS's mounted....