18 inch TRD Pro Wheels with 35s

Will an 18 inch TRD Pro wheel with the 60mm offset and 35x12.50 tire clear the UCAs or will you need spacers to keep from rubbing?

 

Need spacers, 295s will fit. Theyre essentially the same height as your standard 35, just narrower.

 

Never mind your UCA, your going to have rubbing with your front liner, and your body mount, even with spacers. Takes a lot more just to put 35s on.

 

You'll need spacers.
Depending on how big the spacer, a good alignment and pushing the bumper forward will keep you from rubbing.

 

I think you will be more than happy with a 295/70/18, the best fit for the pro wheels,no problems with a 2" or 3" lift.

 

I have the ReadyLift SST Pro +2, 1.25” spacers and 305/70r18s. I’m clear from the UCA and only rubbed on the front fender backing. Once adjusted no rubbing. No body mount chop.

 

I have 18x8 +60 TRD Pro BBS Forged with 33x12.50x18 and they clear the UCA by maybe 1.5 fingers? those are also 12.50 so they should fit but it depends on the tire brand and model