-18mm offset

Is there anyone running 20x10 wheels with a -18mm offset? I have a 1794 with a RC 1.75 level and the rear airbags adjusted on 35 inch Toyo AT 3’s. My question I guess is there any rubbing issues witht this rim and how far do they poke out from the fender. Pics of truck down below!

 

Paying attention since I plan to do 35s on the 1794. I think the stock wheels are +60. A 1.25" spacer would get you to +18. That seems to be a good spot. -18 will give you a lot of poke and rubbing. There is a platinum on here that had that problem with 295s. It's in the wheels thread and the blueprint thread.

All my comments are about the factory 8" rim not an aftermarket 10" rim.

 

More I’m researching the more it looks like I wanna go with a +20mm offset which is offered in the wheel I want just on backorder…

 

I'd do some measuring to see if a 10" +20 wheel puts your tire at the same outer spot as a -18 8" wheel.