2007 Tundra with 3.5" Lift- Can I run 35s?

Hello Everyone,

I currently own a 07 CM 2wd and just got done putting on the RC 3.5 lift. I am now searching for a wheel/tire setup that will (hopefully) allow me to run 35 inch tires or close to it.

I like the slightly aggressive look with a lip on a tire. I do not mind trimming or molding my plastic with a heat gun, but that's about all I want to do.

I am currently looking at:

Dirty Life Roadkill Matte Black 20x10 -19 with Aturro Trail Blade ATS 35X12.5R20LT

OR

Hardrock Crusher H704 20x10 -19 with a similar tire


I am new to this so I am trying to read and digest everything I can. I just don't want to place an order for a product I cannot use.

Thank you all in advance!

 

this is from the sticky here in the wheel/tire forum.

Second Gen (2007-2013) and Third Gen (2014+) Tundra
No Lift Kit
Max tire sizes are:

• 18″ rims: 285/65 R18 – 5/10ths taller and 4/10ths wider than factory. Trimming may be necessary.
• 20″ rims: 275/60 R20 – one inch taller but same width as factory

1.5 – 2″ Leveling Kit (or less)
When installing a leveling kit, you might be able to fit some wider tires than what we have listed. It may require some trimming though, but it is possible.
Max tire sizes are:

• 18″ rims: 275/70 R18 – One inch taller but same width as factory.
• 18″ rims: 285/70 R18 – 4/10ths wider and 1.7 inches taller than factory. Trimming may be necessary.
• 18″ rims: 295/65 R18 – 1 inch taller, 8/10ths wider than factory. Trimming is probably needed due to width.
• 20″ rims: 285/60 R20 – 4/10ths wider and 1.5 inches taller than factory.

3″ Lift Kit
With a 3″ lift kit, the options continue to get better. However, the wider the tire, the greater the likelihood of trimming.
Max tire sizes are:

• 18″ rims: 285/75 R18 – 4/10ths wider and 2.8″ taller than factory.
• 18″ rims: 305/70 R18 – 1.2 inches wider and 2.8″ taller than factory. There are Tundra owners running this size, but trimming is required. Replacing the stock wheels with after-market 18′s that have less backspacing is recommended.
• 20″ rims: 285/65 R20 – 4/10ths wider, 1.6″ taller than factory.
• 20″ rims: 305/60 R20 – 1.2 inches wider and 2.4″ taller than factory. There are Tundra owners running this size, but trimming is required (it’s a tight fit).