2019 tundra sport lift and mods

Just bought my 2019 tundra sport cm. I am want to put a 35" mud terrain on stock wheels what is the best cost efficient lift to achieve this. Ive read alot and getting alot of mixed answers and issues with some sensors. I would like to hear what some of you have done. I pull a boat quite often as well. Dont do a ton of off roading just riding on deer lease. Also what are some good performance mods for some power gains.

Thanks in advance

 

Not too knowledgeable when it comes to lifts...but if you want to sell your front strut assemblies when you lift, I'll be interested! Yours are the red ones?

 

35s aren’t going to fit on stock sport wheels. The offset on the wheels is too high and the tire will hit the UCA. You’ll need aftermarket wheels or will need spacers if you are adamant about runnings 35s.

That being said, you will need at least 4” min of lift if you want 35s and aren’t willing to do some cutting.

All of this depends on your ultimate goals for the truck and albeit your budget.

These trucks can be finicky with the sensors after a lift. Unfortunately you won’t know until you lift it. Keeping at least 1” of rake seems to be the go to method. Although it isn’t perfect.

Exhaust is all you really need for power gains. You can swap your stock filter for a reusable high flow which never hurts.

 

I vote Total Chaos UCA and LCA, Icon 2 1/2" lift with coilovers and remote reservoirs, and 37" tires. Let's spend some $$$! Seriously, though, there are so many good options out there. Icon, Bilstein, Toytec. I run 37s on TC/Icon setup and I love the stability, handling, and stance. But quite pricey.

 

Thank yall i think after further research now im gonna just do 33" tires whats the best leveling kit. I like the 3" front and 1" back kits anyone have real world experience with these

 

I have a 2/1 lift with Bilstein 6112/5160s and 33s. If you Have the coin, spring for a good set of lifting coilovers/shocks the first time in lieu of the spacers. The ride far surpasses stock and not even comparable to a spacer lift which makes the ride more harsh and will wear the suspension components out in short time.

 

Danman34 all you did was change shocks are is there more to it then that

 

The front assembly is designed to lift the truck up to 2.5”. I used an adjustable shackle in the rear to raise the back an inch. All there is to it. I ordered the assembly preassembled at 2” and installed front and rear in my driveway in 4.5 hours.

 

This kit here

 

Yes. Same front, but I have the dual reservoir 5160s for the rear.

 

Dan that thing is sick!!!!!

 

Thanks man! ​

 

Here check out this YouTube of my truck getting some work done by 88Rotors here in SoCal. This will give you some ideas with lifting your Tundra.

https://youtu.be/XF9kXHHecfo

 

2019 TRD Sport
6” Pro Comp Lift
35” Toyo Open Country
Fuel Coupler 22x12