2025 Leveling kit 1.75"

Hey everyone! I have a 2025, limited 4x4. Curious if a leveling kit, 1.75" will need any sensor re-calibration or adjustments? Also anything should I be concerned with by doing so? Just wondering before doing it, being an engineer theirs always an effect when making mods. I appreciate any feedback.

 

No issues with mine at all. Made a nice difference as well. I did my 24 Limited 1.75 in front & it made it just about dead even front & rear. I later added 1/2" to rear just to give it a slight rake. Only adjustment needed was in alignment. Good luck & post pics!

 

I put a 1.75" in mine and made the front higher than the back, added a corn fed 1" spacer in the back and seems to have leveled it out fine. I did not need to re-calibrate or make adjustments.

ETA: Alignment was done on mine also.

 

Love the look!! I'll probably do that is add small spacer in the back too.

 

What brand level kits everyone used?

 

1.75 front is Rough Country, my 1/2" rear is Cornfed.

 

What kind of mpg are you getting with this setup?

 

The lift doesn't change mpg, the tires do. I avg. 15-16 in town & 18-19 hwy. Depends on which tires you choose.

 

Stock rear shocks being used for 1/2” rear lifts?

 

Yep.

 

Rough Country 1.75" lift in front. 295/65-20 Toyo Open Country, no lift in rear. Front is .25 inches lower than the rear.

 

What size tire is everyone running with the 1.75 level?