1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

295/65R20 and Leveled - Is BMC my only option?

Discussion in '2.5 Gen Tundras (2014-2021)' started by treetreego, Aug 10, 2020.

  1. Aug 10, 2020 at 5:21 PM
    #1
    treetreego

    treetreego [OP] New Member

    Joined:
    Jul 28, 2020
    Member:
    #50010
    Messages:
    34
    Gender:
    Male
    First Name:
    Jason
    MS
    Vehicle:
    2020 Tundra Crewmax TSS 4x4
    295/65/20 Nitto Trail Grappler MT on Fuel Mavericks, Leveled
    Are there any other realistic options besides the BMC so I have no rubbing?
     
  2. Aug 10, 2020 at 5:29 PM
    #2
    Ryuu

    Ryuu Hwat!?

    Joined:
    Apr 23, 2018
    Member:
    #14693
    Messages:
    872
    Gender:
    Male
    First Name:
    Oscar
    SouthEast, TX
    Vehicle:
    2017 TRD PRO Barcelona Red
    a few
    Remove your mud flaps and a good alignment to bring the wheels forward a bit and off the cab mount.
    Caster around 3 to 4 degrees should keep you off the cab mount but you’re more than likely going to need after market uppers to achieve that.

    Wheel offset between +25 to +18

    To stay off the front bumper get bumper shims to push out the stock bumper 1/2” forward, trim it or go aftermarket.
     
  3. Aug 10, 2020 at 6:40 PM
    #3
    treetreego

    treetreego [OP] New Member

    Joined:
    Jul 28, 2020
    Member:
    #50010
    Messages:
    34
    Gender:
    Male
    First Name:
    Jason
    MS
    Vehicle:
    2020 Tundra Crewmax TSS 4x4
    295/65/20 Nitto Trail Grappler MT on Fuel Mavericks, Leveled
    No mud flaps. Offset is 25.

    Not familiar with changing the alignment. Maybe something to look into.

    They only rub at one specific spot/angle. So frustrating.
     

Products Discussed in

To Top