Control arm UPGRADE

I have a 7" BDS lift on my tundra what kind of control arm upgrade should I put on it ?? Wanted JBA arms but they wont work unless I add a few more inches via larger springs ?

 

Maybe something here.... https://www.tundras.com/threads/eve...about-upper-control-arms-uca.4497/#post-65564

 

Thanks , looking for replies from people who have aftermarket UCAs on a lifted tundra ... pretty familiar on what brands are out there ... I've had TC arms on previous vehicles

 

I had SPC’s on my 18’ with a 4” lift. Everything was perfect. I was told by many to stick with a sealed ball joint for the Chicago winters. They told me uniballs would deteriorate faster and squeak from the salt and brine used around here. I still have the stock ones on my pro now, but I might put on the SPC’s since they are sitting in the garage doing nothing.

 

Yeah I learned that before .. like the JBAs for tacomas but they dont make em for the lift I have..
SPC might be the way to go

 

I am also looking for a heavy duty replacment upper control arm

That retains stock configuration/Geometry


Did you ever find anything ???

 

I have a 7in BDS!

 

What upper control arms

 

Icon Billet UCAs with Delta Joint

 

I wish... lol...

I thi k I'm going SPC
After speaking with them
There PUC's are factory spec until you adjust the ball joint

 

Where are you getting your SPC's from?

 

I got mine from Amazon $590 shipped

 

Yeah they are $555 right now.

 

Actually jba hd uca is for lifts 0-3 inches for max caster. And has a 1 ton ball joint which can be found anywhere.

 

I have not called JBA. However I read somewhere that they do add camber
And with the procomp 7" lift
Procomp recommends stock UCA's as the lift geometry is designed on that

 

I haven't yet

But most likely Amazon for $555

Unless a vender can match or get very close to that price

 

Double check part #’s before buying

 

I called SPC. And re ived the part number
And will be sure to order that number

Thanks