Dasaita HU and OEM Backup Camera Help

Hi Everyone,

I have a 2010 SR5 Double Cab with a non JBL HU and an OEM backup camera (display is on the rear view mirror). I reached out to Dasaita for assistance on wiring my camera to their HU. They inform me that they have no plug-n-play solution for this.

Has anyone installed a Dasaita HU and successfully integrated their OEM backup camera? This is the HU that I have my eye on;

Dasaita 10.2 Car Stereo for Toyota Tundra 2008 2009 2010 2011 2012 2013 Sequoia Carplay Android Auto Radio GPS Bluetooth Navigation Touch Screen DSP 4G RAM 64G ROM

https://www.amazon.com/Dasaita-Andr...=dasaita+toyota+tundra,electronics,128&sr=1-3

 

Greetings, I was wondering if you figured this one out. I have to do the same thing.

Arcadio,

 

Hi Arcadio,

Yes I did, for this particular vehicle I spliced 3 different wires.

*Disclaimer* This worked on my truck with no issues, however YMMV. I take no responsibility for any issues you may have from doing this on your vehicle. Proceed at your own risk.


Video Feed: Pin 6 is the positive side and pin 7 is the negative side.



Reverse Trigger Wire: Pin 7



Here is the location for both connectors, they are located on the LH side A-pillar: