Looking For Wheel Advice (Black Rhino)

Apologies in advance, I know there are a lot of similar questions that have already been answered but I couldn’t find exactly what I was looking for.

I currently have a 2016 1794 and I’m getting ready to trade it in for a 2020 Platinum. I have fairly new Falken Wildpeak AT3W’s (275-60-20) that I want to put on the new truck. I was also planning on installing 5100’s on the front and back. I found some Black Rhino Overland wheels on sale that are 20x9.5 with a 6 offset. My two questions:

• Do you think these wheels will fit with the Wildpeaks and 5100’s without major modifications?
• I’m in Pennsylvania and I know they can be strict with tires sticking outside of the fenders. I know this setup will be outside of the fenders, but do you think it would be too much?

 

I took a chance and ordered the wheels - couldn't pass up the deal at wheelwell. If anyone else is interested there are two codes which I believe end today or tomorrow:

$200 off $400 - SUMMER
$500 off $1000 - WISHLIST500

There are some brand exclusions with these codes.

 

What a great deal... Too bad black does not go with my truck.

 

I think those tires will fit on a 9” to 11” wheel.

 

Mine is a +20 9” wide. A +6 9.5 will stock out a little over a 3/4” past what I have.

 

I hope I'm wrong, but I think the 9.5" wheel may look skinny on a 275 width tire.

 

These are 275/60R20 Falken Wildpeaks on 20x9 +18mm. All I have is a 2.5” level up front. The only thing I had to do was remove the front mud flap, and no rubbing issues after that

 

I would say it depends how much you're lifting your truck. How high are you going with the 5100's? If you're leaving it stock height, then yeah most likely you will have issues. I'm also running black rhino 20x9.5 +6 offset wheels but with 35x11.50r20 tires. I lifted my truck about 3 inches and have no rubbing issues.

 

Those codes aren't just for the wheels I ordered, they're across the site. There are just some brand exclusions.

 

What is the tire size, and what lift did you do. This thing is sexy!!!

 

Thank you! Haha.
Tires are 295/55/20 and lift is Bilstein 6112/5160s set at 2/1 with toytec shackles in rear.

 

Thanks for all of the replies.

I have the 4 ply which are rated for 7.5 - 9.5. I spoke to Falken and confirmed.

Thanks for the picture. Yeah, I had a feeling it would be pretty far outside of the fenders. I may end up getting flares. BTW your truck looks great. I'm hoping my new truck will look similar (definitely going with white).

I had that thought too. I didn't want to buy new tires yet since mine still have a lot of tread left, but I may end up selling them with my current wheels and buying something different.

Thanks - another great looking truck. I had to do the same thing with my current truck. I have 20x9 +35 and just had to remove the front flaps.

Good question. I've been reading through all of the 5100 threads and trying to learn more about the different setups (I've never changed the stock suspension on my past Tundras and 4Runners) . I was thinking I was going to do the 5100's front and back, with the front on the middle setting. But it also seems like a lot of people say that the rear shackles and new bushing will really improve the ride quality, so I'm still undecided.

 

I’m running 35x12.5x18 on black rhino Arsenal’s

 

Just wanted to say thanks for the help. I ended up talking to @Coachbuilder1 (awesome guy) to get my build figured out. I went with the 5100's all around, 2 CB shims on the driver side and 1 on the passenger, +2 CB shackles, and OE flares. I finally got some pictures uploaded.

 

Love the flares and the wheels are sick did you use spacers?

 

Thanks. No spacers - it's just the 9.5" wheels with +6 offset.

 

The wheels are sweet, I think you posted in regards to the $500 coupon. That was a great buy, too bad they only had them in black since I have sunset bronze and would not look good with my chrome.