P2128 Throttle/Pedal Position Sensor/Switch E Circuit High Imput

I was driving home last night and waiting at a light and I noticed I didn't have much power, where I needed to push the pedal down further to go anywhere. I then noticed the CEL on the dash and looked it up. Is there a TB/Pedal reset procedure I could do to remedy this CEL? I looked under the hood and the wires all look fine, but I'm hoping it's a simple "fix" to reset either the Throttle Body or the Pedal since it's all electronic these days? Anyone have a suggestion?

 

HP Tuners has a throttle re-learn under the special functions, might be worth a shot.

 

Alright, here's an update, I swapped the throttlebody that @snivilous let me try out and even disconnecting battery and doing a tps reset sequence netted no chnge. I then bought a used pedal assembly from a 2018 with 35k miles and threw that in tonight...no change, again

The next thing to do is remove the APP harness and replace it...ugh! I'm hoping this next attempt is the key.