Removing stereo/dash with bench seat

I have a 2012 Tundra with a bench seat and I can’t find any information on how to get the center panels / dash / stereo out. I’m trying to replace my radio as well as add to the blank ports in the center. Thanks for any help!

 

Follow these steps in this video. When you get to the bottom of the panels (where the cup holder is at), there's 2 tabs (1 on either side) you need to push in, to slide the cup holder out. Then there's 4 screws, 2 down lower and 2 that are up inside the cup holder area (you will need to slide the other portion of the cup holder all the way out to access the two up higher). Then pull the cup holder frame out. Once it's out, everything else is just like the video.

https://www.youtube.com/watch?v=1s34DK36dRk

 

Hey I came here looking for the same thing. Thing is, this isn’t the bench seat configuration, from what I can tell. No cup holders except in the back of the fold-down middle seat.

 

I created a DIY since I replaced the AC controls today. Figured it should partially help since it's right below the radio receiver unit.

This shows the removal of the cup holder assembly and the AC controls (all underneath the radio) for a 2011 Tundra 4x4 5.7L with bench seats:
https://docs.google.com/document/d/1uOErnAZNtjCIWACijSDmzSHTV4vG8nXvlAbFZE-44k4/edit