Transmission filter replaced or no?

Does anyone know if Toyota recommends that the filter be replaced or just drains and fills with new fluid, leaving the pan intact and not removing it? It’s my understanding that this filter is unlike a typical oil filter and is more like a “strainer” that catches large chunks and at that point the trans is toast anyway. This would be for newer 2017 and up models if that makes a difference. Thanks

 

Here's a fresh one on your desired topic. Started March 16, 2021. Caution: As with many topics, there is both wisdom and bs in this thread. You decide. At least you can read different viewpoints.

Search will yield many other such threads, on this and other more common automotive maintenance subjects.

https://www.tundras.com/threads/transmission-filter-change.85408/

 

No

 

Update 4/9 for anyone that is debating on a pan removal and filter change on the trans fluid. I contacted Toyota and they stated not to remove the filter, as it is a strainer and will not be contaminated unless the trans is going out or showing signs of shifting issues, in which case it would need to be removed as well as the pan for inspection. Just drain and fill needed.

 

I am of the idea that they are inexpensive so you may as well swap it out. Here is a nice video of likely the best process to do the job.
https://youtu.be/cutlJH5KR2Y

 

Everyone said least one pan bolt will break. Don't do it.