TUNDRA TRD BIGGER TIRES

Hello everyone!!
I have a TRD PRO 2020 ARMY GREEN
and to put the BF GOODRICH K02 on them. I want to put a bigger tire on it and the closest thing to a wider and taller one is 305/65R18.
Is that size can be fitted on the Tundra with no mods?

 

Westcott lift in front and 2” shackles in rear 35/12.5/18 no spacers.

 

When cornering they rub?
By the way the Tundra looks good!!

 

285/75.
No rubbing issues and they will be over and 1 1/3” taller, while only 3/4” narrower then a 305/65

 

I was searching for BG K02 but in the size they not work it.
The 305/65R18 will rub? Or I have to modifie something?

 

I would think 305 width would not clear the stock UCA with factory offset wheels.
I went to 285/75R18 because they work with the factory TRD Pro Fox suspension, and factory UCAs and wheels.

 

No rubbing at all full turn in forward and reverse. Thanks I love my tundra now! Can’t wait till the snow starts to see how it performs.

 

Post some pictures!

 

I have 35's on my truck now (3''front lift) with Spidertrax and TSS wheels I want to remove the spacers but I dont see how I wont rub the UCA how did you manage staying away from that?

 

Unrelated, but that black skid plate looks sick! Might have to do that whenever I get around to pulling mine off to install the TRD front sway.

 

I use Raptor paint on the skid plate

 

It is really close to my uca like less than quarter of an inch. I can’t put my finger in between the tire and the uca. But it does work. I like the fact that the tires are tucked inside the wheel wells so it’s not slinging mud and snow all over the side of the truck too.

 

is that skid plate painted?

 

Are you on stock upper control arms? What brand tires?

 

Yes stock upper control arms and Sierra Trail M/T 2

 

That’s pretty impressive. I was going to try 305/70r18 on the stock pro wheels. But everyone said I either needed spacers or it’ll rub. And the 305 is not as wide as the 12.5 you have on there. I guess i should’ve tried it first before ordering wheels.

 

Yes I painted with Raptor paint. The one they use to paint the bed of the pickups.

 

This is the skid plate

 

Do you have a pic from the side of the truck to se how bigger the tire is on the tundra?

 

Tons of pics from all kinds of angles in my build thread.

 

Looks great! How’d your alignment work out?

 

The alignment was a tad bit off but very very close a couple of things were in the red. The alignment guy said aftermarket upper control arms would probably fix that.

 

I bet your tow’d in a little to keep your tires from hitting the UCA?? I’m worried about mine (I just went up about an inch on top of my Pro suspension) getting proper alignment. Fingers crossed..

 

Here’s the alignment report. They didn’t have a setting in the computer for TRD pro so he called it a limited

 

Thanks for posting. Obviously I have no idea what I’m talking about when it comes to alignments! Lol