Utilize Switches to right of Emergency Light Switch

I have a 22 Platinum and am looking to eventually add the TRD Pro grille and a light bar + 2x ditch lights. I am wondering, is it possible to get those wired up and a OEM switch put in to the right of the emergency light switch? I have 3x placeholders there now (I believe they are typically used on the TRD-Off Road package vehicles?).

 

Was thinking of the same thing .

 

They really are the perfect location for some regular use switches. I haven’t found anything yet but Hopefully the aftermarket comes up with something.

 

There are aftermarket choices for additional switches in this location.

I have not heard of any options for this location.

which area are you wanting to add switches?

 

The center series of switches is a single part. I doubt aftermarket will support this.

 

That assembly is one big circuit board inside. I believe everything inside functions through canbus and the bcm. So I don't see any situation this works for us.

 

Ah I was hoping for the latter. Can you share some links to aftermarket for the former?

 

I'm looking for a source for these parts as well. Want to add a stock switch for gorhino power running boards.

 

I have purchased a few already and will send pics of switches and sources when I get home tonight.

 

ouch that sucks, I agree that would be perfect space to add switches especially ones I want quick access to like light bar. Left switch panel under the steering wheel, i can't see any of those without contorting around, dangerous to try and find one when driving so I've stopped trying

 

@nrm91
@DynoDog

Here you go guys. These light up blue and match factory switches.

https://www.aironboard.com/online/products/switches/toyota-push-switches.html

https://raveoffroad.com/products/trd-light-bar-dash-switch

 

I hate the lower left button panel position. My left knee does not have eyes or fingers to operate it Toyota

 

Almost a year ago now I installed these lower left switches, this link below might help. Having recently installed a CANBUS switch for my light bar triggered by my high beams I can confirm that to utilize the switches under the radio will be difficult without a complete bypass harness and CANBUS controller

https://www.tundras.com/threads/off...nd-production-mods.105476/page-2#post-2724488

 

The upside is that lightbars shouldn't be used for regular driving anyway, so it should be simple enough to stop while off road, safely look for the correct switch, and turn them on before continuing down the trail.