Volk TE37 fitment

Anyone know if TE37s off a 2022 Tacoma will fit? Thinking about moving to one and dont want to part with my expensive wheels. I know lug pattern is same but thought hub was smaller.

 

All signs point to no. At least, not without modification. the aftermarket wheels may or may not have the same lug holes as the factory. Seems the center bore and lug hole size are different even thought the lug pattern is the same.

https://www.tundras.com/threads/tacoma-wheels-17”-on-a-2022-tundra.116196/#:~:text=The trouble is, the Tacoma,bolt pattern is he same.

 

They fit. At least a 3” lift.

Use hub centric rings that can be bought on Amazon.

Several members here have te37‘s mounted. Don’t get rid of them! Damn light and strong.

Search the wheel and tire threads. They are there.

 

Here you go…

https://www.tundras.com/threads/gen...res-photo-thread.101215/page-115#post-3238198

 

Do we know if the same wheel from the Tacoma will fit the Tundra? Or are they different part numbers? Or more of a universal design for the bolt pattern?

 

All the te37’s I’ve seen on a few trucks local to me have the tacoma/4runner/fj hub size and same 6 lug bolt pattern found on the 2022+ tundras.

My SCS’s are meant for tacoma/4runner/fj’s as well. 6x139 17’s on a -10 setup. Exactly the same at the 4runner te37’s op mentioned.

The link I provided show it mounted on a 3rd gen tundra. Here’s some pics for reference. If I could afford $4k rims…the te37’s are my absolute choice. They weigh next to nothing. Add some lighter 35” A/T’s and still lighter than most setups.

 

They should fit. These are the ones I bought from Evasive. https://www.evasivemotorsports.com/...wheel-18x90-offset-0-6x1397-pressed-graphite/

 

It won’t fit. Sale them to me.

 

The gram lights can be found with a +36 offset. I wonder how high an offset you can get the te37s..

 

TE37XT highest offset is +15
Still waiting to see this done

 

Got a front profile pic? Seeing his aggressive the like is at 0 instead of -10

 

You're not wrong. Seems like 0 offset on these new Tundras are like -10 on Tacomas. I'm glad I didn't go anymore than 0. That's why I decided to go 18s instead of the 17s. -10 would have been a little too much poke for me. Here's a couple more photos for ya.

 

Very nice. That’s perfect.

 

Did you use hub rings? Some guys in the FB group said they didnt need them others said they used them but then couldnt get the center caps to work with them. Thanks!

 

It's one or the other. These are lug-centric wheels, so not absolutely mandatory. But if you did center caps, it installs from the inside of the wheel, thus you cannot use hub rings.

 

I figured as much they’re lug centric on my 2022 Taco as well being the hub still not the right size. Just have poured over countless pages and websites about pros or necessity of hub rings. I’ll probably just go without. Thanks

 

I'm getting mine installed today without hub centric rings. I'm going to go with the center caps.

 

good deal. What offset did you go with?

 

I went -10. Got a good deal or I would have gone with the +15.

 

Stock suspension. -10 offset, 35x12.5x17 Toyo RT Trail

 

any shots dead on?

 

Careful using wheel cleaner on the center caps. I learned that the hard way. Using non acid P&S brake buster wheel cleaner and this happen:

 

From the front or side?

 

Damn. Thanks for the info. What do you recommend?

 

front, looks good, that poke is not that bad actually

 

The poke is not bad at all

 

I didn't use hub rings. I just installed center caps about a month ago and haven't had any issues so far.

 

17x8.5 -10 with hub centric ring

 

What lugnuts are you all using on these? About to switch mine over to my new taco (same pattern as the tundra). Seen some use Gorilla and some the L42s

 

I’m using Rays.