Extremely Cheap! 5.29 gears. Motive gears OK?

Went and got new shoes 295/65r20 today to go along with the 5.29's. I put about 120 miles on the gears after reducing the pinion shim. There is a slight whine on decel/coast at 60 to 45mph. Below 45 it's not noticed edit: its there but gotta listen for it. Diff case is not hot and went through a few cool off cycles.

 

Wow, i re geared my son xj a few years ago. Full install kits with bearings were around $200

 

I am having the same problem

 

Price is back at 102$ for the rear gears

 

I have everything except the speed master limited slip and the front master install kit. Paid for both the day after Black Friday. Haven’t heard a single thing

 

Wondered about getting a spare rear gear setup since it's still available at lower cost? Hmmm

 

You nervous the gears won't hold up?
Not giving me a whole lot of confidence!!

 

No not at all. Read People on 37-40's have no issues. I have an extra set of wheels and parts. Don't know why but got a good deal...guess it's like women and clothes/shoes. Haha

 

@carn_dogg well I couldn't resist with the wet roads and I got about 350 miles on the gears...
Speedmaster hooks up fast taking off and will get you sideways and fishtailing. Certainly will put a grin on your noggin. Haha

 

What are your initial thoughts on the 5.29 ratio itself? Is it worth the money and hassle with a blower, or too soon to say?

 

A little soon... But it does take off smoother, seems less resistance? Shifts nicely. I like it.
Yesterday I was at 70 with 2200rpm and 75 was 2500rpm for a short time with 35's. Oh and it holds 6th and doesn't downshift as much. Pretty much what a lot were saying about the 5.29's.

 

This is most excellent news. Going to be really nice to have it installed. I’m still up in the air about when I’ll get around to it. I think im still going to do LSD and gears in two different installs.

I’m going to use NEGP to do the REM polishing on the gears, as it’s only 249 for both sets. But once you do it, you only have like a month to get installed before you might get any surface rust. So I’m going to hold off on that part. Still need to acquire the front and rear master install kids.

 

Or just put a coat of oil on the steel and store in a dry place. Should rust on you.

 

Has the 2nd Gen loaner program officially started?

 

There's a couple sets going around... @Mdl has mine now.

 

I should be done this Friday and send it off for other installs as per @VWTim. @ZPhilip it's just the needle bearing removal tool. Send a msg were to mail it out to.
Thanks Tim, it was great meeting you.

 

I had started this thread for it. Might be easiest to start doing the rolling list of names over there similar to all of the other loaner threads. My kit is currently with @Silver17, but depending on timing, he may be able to get it off to someone so long as he gets it back for his own "go" time.

https://www.tundras.com/threads/2-2-5-gen-ecgs-bushing-tools.151006/#post-3764467

@VWTim - if you want to be included in that link, I'll just post up 2 lists for tracking purposes. I'm happy to share the thread. Let me know.

 

It’s true, sorry for holding up the process if anyone needs it. We can get it out to someone else if needed. I won’t need it until mid February. The whole process was just being established when I got my hands on it.

 

What sealant does everyone use on the front diff tube and actuator? Do i really need to spend $30 for a tube of FIPG?

 

I used Aisin FIPG that was leftover from my timing belt

https://www.rockauto.com/en/moreinfo.php?pk=11835301&cc=0&pt=1000166&jsn=280

 

Aisin fipg here too. You get a bit more than Toyota brand at a lower cost. Amazon had it delivered in 2 days.

 

Permatex "the right stuff" works wicked for anything my buddy and I have ever sealed. Diff covers, Toyota 3rds, tcases, oil pans, etc.

 

Did it come with the church key to get every last drop out?

 

The one on Amazon came with the Church key. I used the red aisin ab128 fipg. The price doubled since a few weeks ago!