2024 Factory installed TRD Lift

Interesting, but don't some dealerships install some kick a$$ tires which would do the same thing and they don't remove the fog lights.

 

DOT Regulations in certain states.

 

At the dealership is different. The factory installed lifts remove the fogs because technically they could be sold in any state and they dont want to be liable or not legal on the road. I got my TRD lift installed at the dealership and it is in the install manual to remove them but I told them to ignore that and they agreed they wouldnt worry about the fogs. Also I think PA there are no height limits...Or atleast never heard of any.

 

Talons grarage have a skid that was made to fit the lift. https://talonsgarage.com/products/toyota-tundra-2022-2023-engine-skid-plate

 

Talon made one for trd lift? That goes over skid?
I made spacers and got longer bolts and used my trd plate.

 

I still have my TRD skid plate installed. The only thing removed from my truck was the lower air spoiler and it's motor. Everything else from factory remained on the truck, including my Diode Dynamics fog lights that I specifically told them not to touch. The fog lights are the only reason they would need to remove the grill, but actually they can be installed without removing the grill. It seems that when getting this lift installed, it would be prudent to inform the dealership or shop that you want to retain the fog lights and skid plate, and anything else they are to ask beforehand. Just my thoughts to cover your butt and truck too.

 

Copy. I told them not to disconnect the fog lights. I was advised they don't anyhow. They don't use the lower sway bar brackets and have had no issues. Thus allowing the skid plate to be installed with no modifications. I have the cheap skid plate. Looking at aftermarket options.

 

So here are some pictures of my current skid plate with the sway bar drop and lift. To be honest, I didn't expect to see the sway bar like this versus behind the plate.

 

I used spacers and fits over swaybar and looks great. Also evidently talon garage sells some now that fit.

 

On Facebook, Westcott Designs said you can actually not use the swaybar drops and keep the stock ones. You can also put 35s on without rubbing the sway bar by keeping the oem.

Does the sway bar affect the alignment of its moved back to oem position?

 

I didn't look at after pics and that was stupid of me for sure. I want to retain the skid plate and swaybar, so I'll have to make some adjustments for sure. The link you provided was very informative on that issue, thank you.

 

Wescot is different than the trd lift. Trd lift actually gives more travel than any other 3in lift on market. You actually have to use the sway bar drop for trd lift. Wescot is just a caller lift it just compresses springs for lift.

 

Also the skid will still hit the sway bar with it in front.

 

I used spacers and it looks good. Still waiting for an after market to come out. I may start welding and extra angle piece on front of trd plate to compensate for the gap in front though.

 

My 2024 platinum with 3” trd lift kit from factory had fogs missing and dealership thought it maybe a miss build lol. Then later after digging found out all the ones with the lift installed at the factory have the blanks in place of the fog lights (someone on another thread said it’s in step9 or 15 maybe to remove them, if doing it outside factory). DOT compliance issue as others stated above, however the wiring harness and switch on the stalk remain, so just pop off front and put in factory ones or like me after market diode dynamics plug and play kit. Works great I also did the pro grill and marker lights, and heretic light bar kit all at one time since had to take the front off.

there is a YouTube video found after buying the trd skid plate, so I ordered a drop kit for it, but the video the cut just cuts his to prevent contact with sway bar. The drop of sway bar sucks most of all and causes slight touch / rub at full lock when you put on 35’s on +25 offset, 0 offset rubbed on front fender liner and rear as well, but +25 for some reason only barely touches/ rubs at full lock on the frame triangle for safety.

https://youtu.be/p_PY9i1WEK0?si=64Lk7VSSTXbAPvzk

Stock with blanks:



after with DD pnp kit s6’s

havent installed trd skid plate yet haven’t decided if want to mod like video or use the drop kit I got off Amazon?
Readylift 67-5443 TRD Pro Skid Plate Adapter Kit

$50 Readylift 67-5443 TRD Pro Skid Plate Adapter Kit

https://www.amazon.com/dp/B07QCHHWTC

Hope to get to it during Christmas vacation along with cat shield purchased.

 

^^^^^
Looks good! Stance is nice with tire combo.

 

Looks great, enjoy, you may want to add catalytic converter cover.

 

We're in a hot spot for catalytic converter theft and we've yet to experience anything...and we have 3 prime candidates...

 

Here in Triad NC not allot but i been watching so many videos that didn’t want to chance it so here it is gonna install probably next weekend after get over the flu. Ugh.

couldn’t resist this one so if they roll under it the see “Not Today” and the middle finger

 

Needs to have brackets to hold a claymore mine. After that its just a matter of the tripwire. /S

 

That would be awesome maybe a pepper sprayer or teargas, lol. Shame have to do stuff cause other people can’t keep sticky fingers to themselves. Respect other peoples $#!¥ and we can all get along, lol.

 

Are you saying you rubbed the sway bar with 35X12.5s on +25 wheel with the factory TRD lift?

 

I think our regular front skid plate will clear this small of a lift. I would need to do some measurements, but just putting it out there.

I know our TRD pro lift plate will fit it.

 

We do, this thread needs more pics.

 

Cutting more of these out today! They have been popular!

 

Does the factory lift come with auto leveling headlights or is not installed, the dealer installed lift tells them to disconnect and remove linkage?

 

How does the factory lift ride and work off-road? Does anyone recommend it over westcott design? Wondering if I get the factory lift or aftermarket?

 

I've had the Westcott lift and TRD Lift on the same truck. It's night and day. Westcott lift is terrible - get a kidney belt and call your dentist. Don't believe me? Come take me Westcott lift, it's yours. Free.

The TRD lift is balanced and stable. Drives, turns, and handles like the original truck.

 

that is great to know, I will have to get with my dealer.