GEN 3 (2022+) Wheels and Tires Photo thread

Thank you sir! I appreciate it!

 

2024 Tundra SR5
Readylift 3” SST Lift Kit SKU: 69-52310
Fuel Piston wheels 20x9 +1 offset
Toyo Open Country AT III 285/65R20
Rokblokz XL mud flaps

My apologies.. Posted this earlier today but deleted that post (user error)

 

Looks Good!

 

Do those Rokblokz offer more clearance than factory mud flaps? Truck looks great.

 

Thank you! I cannot say as mine didn’t come with any factory mud flaps. I noticed a very slight rub on the front driver side flap at “near” full left turn but it isn’t critical… that particular area is very flexible. When I measured the distance between the tires and mud flaps/wheel wells the driver side tire is a whole 1/2” closer! It was recently aligned, drives smooth, but I don’t know why it would sit a good 1/2” further back in the wheel well. Caster adjustment?

 

It’s probably the caster causing the difference.

 

I don’t get it but I’m kinda new to this , I have a buddy running 35/12.5 20 with only 1 inch wheel spacers and doesn’t even have any rubbing anywhere . And you have a 3 inch lift and an inch smaller on the width .. that would piss me off if I was in your shoes haha

 

My recent setup: OEM TRD 3" lift; KMC 718 Black Satin/gray tint 17" +18mm offset wheel; BFG KO2 285/70R17, Load Range C; Total tire/wheel weight 80lbs.



OLD OEM Wheels with TRD 3" Lift

 

yes, C rated! Still a bit stiffer than stock, but overall I like the ride, and so does the wife, and they’re pretty quiet tires.

 

@JGG10,
Your setup looks great and love your truck color. Did you have to turn-off the PCS due to the combination of tire height and 3" lift? thanks

 

No probs here with 36/12.5/18 on stock TRD PRO suspension.

 

Was looking for the weight on the OEM tire on my 1794, set of 4 for less than $600 on Tirerack.

 

Just installed Kansei 17x8.5” wheels and 315/70/17 load range C Goodyear Territory MT tires and the ride is so stiff. Aired down from 40psi to around 32, it got better but still bouncing around. There are no suspension mods. I had the 20” limited wheel and tire set up and thought if anything the ride would get better since there’s more sidewall. Is this anyone else’s experience?

 

Stock flaps no rubbing ?
Thinking of going 295/65/20 with stock mudflaps. Got levelling kit installed today. 1.75”

 

Stock flaps?

 

Yes sir

 

Awesome !! Ordering Toyo at3 295/65/20 as we speak lol. Can’t wait
Stock size is ok. But ,,,

 

No no be careful with those wheels.. stock wheels are fine with 295/60/20 with their offset if it’s limited wheels, platinum wheels or sport wheels.

 

Aftermaket +18

 

3.5 lift

 

Stock flaps and zero rub, even at full lock forward or reverse

 

My 295/60/R20 with +15 rub on the liners and mud flaps. Mud flaps are off right now but going back on with some trimming.

I don't mind the liner rubbing but need the mud flaps to protect paint so time to get cutting!

 

Crap. Post a picture when trimming is done and flaps back on I’m curious
Thanks

 

Note that wheels and tires fit pretty good except the little rubbing while turning. The OE mud flaps have a bump in them that others have cut off and that worked.

No trimming of the truck!

I think the liners can be pinned back to keep it away from the tires.

Not too big a deal and I have had the wheels on the truck for about 14 months.

 

I see. Easy peasy.

 

Yeh it’s not only the offset of yours but also the width vs my factory 20x8. I can go full rotation with 35x11.50x20 or 295/65/20 or what I have 295/60/20. The 295/60/20 was the safest bet for no rubbing on stock suspension with my oem 20x8 wheels. As you go aftermarket u run into most are 9” wide and usually a little more aggressive offset. I think you will be ok with some pinning back and taking out that little black box behind the front wheels.

 

Icon 3in lift 37x12.5 17 no rub at all

 

i think I’ll be ok with pinning back the mudflaps by 3/4” just need to figure how to do so.

 

might want to take out that metal bracket too. Gives way more clearance and only two bolts.

 

Perhaps its the picture perspective, but the truck looks like it has a fair bit of rake. Icon looks to be well built parts.