Plug and Play Brake taps

I’m also interested in a gen3 Tundra brake harness if/when available. Thx!

 

Just PM’d

 

Was there any update on the gen 3 brake T?

 

PM sent

 

Are you willing to make an extension harness for aftermarket switches or have an idea where to find the plugs to make my own? It's for the OEM fit push button switches a lot of us use for lightbars and stuff. As best I can tell, Air On Board and Amazoon and others all appear to use same plug. Below are pics I found on a few different sites.
I want to move my switches but don't want cut and resolder the current connections. Just simple plug-n-play extension. All low power since switches are rated 3A max.

 

They are JAE and they do have male and female connectors. I’m not sure if I’ve seen an extension harness but I’ve never looked.

 

I believe this is the female. Then there is a mating male and terminals of course. Then 22 gauge wire and tubing or braided sleeve. Mouser also has them I believe.

They are kind of a pain to crimp.

 

put me on the list please 2019 CM

 

https://fbchs.square.site/product/tundra-2014-2021-brake-t-harness/19

It’s just 3.0 Gen we don’t have figured out yet, the 2.5 Gen ones are the link above.

 

thank you Sir

 

Hello! Any updates on the 3rd gen front? Thanks!

 

No solutions for 3rd gen yet but if anyone has one in the Denver area for @Puppypunter to tinker with, hit him up.

We talked about a few ideas but nothing obvious right now.

The Curt module with L and R side T harnesses seems viable but that’s $200 just to get a third brake light signal.

Possibly the best source may be the cab 3rd brake light or just capturing at the pedal.

 

Have you seen the rsi smart cap method? They t from where the trailer plug goes behind the bumper.

 

Tow connector is stop and turn for L and R as far as I’m aware.

 

Any option for a similar harness for the turn signals?

I have a multi output light that I'd like to use for the turn signals as well. Already using this harness for red on brake and want to tap the red flash for turn as well....

 

https://fbchs.square.site/product/t...-pair-1-/36?cp=true&sa=false&sbp=false&q=true

 

Ordered, thanks

 

I’m way behind right now. Gonna try to churn through the queue though. But new orders won’t get started on this week, for sure.

 

Appreciate the heads up, there's no urgency on my end.

 

Good Afternoon Jonny I know this is an old thread hoping that you may still have a solution available, as I purchased a topper and despise the vampire connectors equally. I have a third gen Tundra 2023 SR5 and would like to use your solution. What is the status on availability, and will this work for my 3rd Gen truck? Thank you kindly for the reply!