GEN 3 (2022+) Wheels and Tires Photo thread

Thanks dude! no issues so far. Zero rub at full lock. I also purchased the westcott clearance kit which has screws to pin back the liner.

 

Congrats. I’ll send u a trophy for finishing in first place.

 

how do you like those continental tires, I am looking at getting those when my factory tires wear out.

 

no no u get urself the trophy for having the lightest setup out remember

just make sure the trophy’s not too heavy or you’ll need E range tires

 

I've had these on a few different trucks, have performed/wore really well. My other sets all made it to the warranty mileage. Really good in the wet, pretty good in light off-roading, and very quite on-road. Start to run out of capability in deeper snow & sloppy/muddy off-roading.

I'm primarily an on-road guy (driving around the farm & on the NC beaches in the summer is the extent of my off-roading) & the Conti's haven't let me down.

 

How's the ride with the Fabtech level?

 

No real difference I've noticed when compared to stock. Still a good balance of shock & spring rate.

 

Hey @CT303,

First off, congratulations on the pickup! The Capstone is one of my favorites from the new line of the Tundra's. Our S8 grill kit is a great addition to adding some forward-facing light. When deciding on Amber or yellow, consider whether you will be adding more light and what type of driving you plan on doing with the truck. Some Amber lighting up front will help in dust/foggy areas, while white light will create a wall of light in those conditions. I will also link below some information about this topic. If you have any questions or want to get a quote started with a forum special, please feel free to contact bill@bajadesigns.com.

Amber vs. Clear
https://www.bajadesigns.com/amber-vs-clear-what-is-the-difference/

Lighting Zones
https://www.bajadesigns.com/help/lighting-zones/

ELS
https://www.bajadesigns.com/els/

Best,
Bill

Bill Sonevongxay | Forum Sales & Support 
Email: Bill@bajadesigns.com Phone: (760)560-2252

 

Finally burnt off enough of the factory highway tires so I could justify (to my wife) new all terrains. Went with the new Falken Wildpeak A/T4W in a 275/60R20. Loving the ride so far, quiet and solid.

 

This might be the first gen 3 with a CAP that I've locked eyes with. What cap is that?

 

thx so much — it’s a Leer 100xr w windoor sliders.

 

Depending on dealer locations in your area. Leer 100xr is the same as a Century UltraSport. Manufactured / shipped from same plant. Different "brand" / dealer. Can compare my album pics to jachal's. Identical.

 

rly interesting. yeah this is my second cap from Leer, both from the Leer Factory plant in Milton, Pa just a couple hrs south of me. order the cap, when it’s ready drive down they stick it on, hook it up n you’ll drive away happy. ask for Marlin, great experience.


this was from the day i got it. (pre-lift)

 

I'm running the AT34s in 33". I also have a 1" front leveling kit but have not installed it yet. How is the ride with the level? Did you notice a stiffer front suspension/ how did it effect the ride quality?

 

2024 Limited TRD Offroad
Rough Country 1.75" level
Nitto Recon Grappler 285/65/20
(Truck is real dirty right now)

 

Looks good.

I’m picking mine up tomorrow, Limited TRD. First stop is the tire shop for 285/65R20 Toyo AT3s.

 

thanks! that tire size is the sweet spot imo - enjoy!

 

Got my new ride today and went straight to the tire shop. 285/65R20 Toyo AT3 on stock Limited OR wheels with the factory lift. Have slight rubbing on the raised section of the mud-flaps, seems to be clearing the swaybar just fine.

 

Looks great!

 

Looks great - hopefully you're sitting in it in your driveway as you post!

BTW, i did remove my mudflaps before adding the 285/65/20 tires. Otherwise, no rubbing whatsoever for mine.

 

I have them, but I've got my winter tires on oem wheels currently. Will be putting some 285/70/18s on them this spring.

 

Looks like they should be easy enough to either trim or push back and attach out of the way. They are just barely touching at ride height. I’ll have to look closer and see if it gets worse or better through the wheel travel.

 

Where did you get that soft top for your bed? Loks pretty cool

 

Straight from softopper.com

 

Nice!

 

They're real easy to take off

Four 10mm bolts per flap. Should take you about 15 minutes tops.

 

Sure, but I think if I spend about 30 minutes I can keep them and stop the rubbing. I’d rather have the protection they offer.

 

@Baja Designs Super helpful, thank you! I live in Colorado so it would be for Snowy days. Don't get fog or dust. Sounds like Amber is the way to go? I will update my pics once I get these installed. Pretty easy to hook to electrical with the iForceMax? Thanks again for the response!

 

Which Lug nuts did you use?

 

I have no idea, just asked them if they had black ones, had discount tire put them on when I changed the tires.