Please show me your 285/70/17's

I want to do the same thing. I hate the E load tires, C load would work just fine for how much weight the tundra can handle and the E loads ride like shit. I was looking at icon or rock warrior 17’s. My E loads seem to be lasting a long time, almost wish one would blow out.

 

Since that post I went with 285/75r17 Toyo AT3 in load C and am really happy with the ride and performance.

 

Those were the exact tires I was looking at.

 

Were you at 1.9 front and stock rear right? Have a side pic?

 

Here ya go...

 

Here's as side as I have on my phone right now. I'm currently at 1.9 front and stock rear, however I just ordered Coachbuilder +2 shackles because after my cap the rear is just a tad bit low and the +2 should make it perfect with maybe a half inch rake. Did you get those Bilsteins installed yet? If I remember you have a snugtop on your rig so probably will need rear shackles as well if you're going the same route.

 

I was waiting for the stock tires to wear down. They still doing good but its time for some new tires. Never got around to installing them yet. Looking to do everything here this next month. Yeah I wanted to see what it looks like first before I do the shackles. Your wheels are the mr313 right? I want to do the mr702 because of the bronze but not sure of the 0 offset.

 

Yep 313's. There was quite a few wheels I was interested in but I was certain I didn't want 0 offset. Even with +25 and 285/75 they still stick out a little more than I like personally.

 

Hey, those are exact same wheels and tires I’m contemplating. Any chance you have a pic that shows the poke? And what you had to trim to fit? I’m gonna have about same lift and really think that size tire is perfect.

 

I had to melt the front fender liner on both sides and push it forward about a half inch as they were rubbing in reverse at full lock.

 

Thank you sir. Helps a lot.

 

Cooper Discoverer AT3 XLT LT285/75R17's on RW Alloys

Had to remove the front liner mudflap due to rubbing at full lock in reverse, other than that, no rubs anywhere!

 

I just had these put on after I installed an Eibach 3/1, I think they fit perfect.

 

The 295/70/17s are pretty nice with no metal cut. Zero offset is the kicker.

 

Do you have pics with the 285/75 with the new shackles? Still debating on 70 or 75s.

 

Shackles are scheduled to be installed in a couple weeks. Here's the only pic I have on my phone of 75's, sorry it's not the best. If you're on the fence just go with 75's, learn from my mistake.

 

I learned from your “mistake” and went with 285/75/17.

 

I think I read on another post that I could of fit 315’s?

 

Looks great! I'm a big fan of these tires.

 

How much are you lifted in the front? I see you still have the little flap. Also whats the spacing of those wheels. Im set on these tires as well.

 

Front: Bilstein 6112 set at 1.9, CB shim: 2 on passenger, 1 on driver. CB bumper spacer. ( I had to remove front flap due to rub at full lock in reverse.
Rear: stock
Wheels: 17 x 8.5 +25

 

Here you go

 

IMHO 285/75/17

Pic has a 285/75/17 up front and a 285/70/17 in the back

 

Some more 285/75.

I am very seriously considering going back to 285/75 in a ridge grap vs my current 35x12.5s. Size is near negligible IMO.

 

Run the mullet setup. Business in the front party in the back.

 

Broooooooo

 

What offset and tire size are you running?

 

+25, 285/70/18

 

Oh my this is nice looking. I love those wheels with the silver sky!

 

Hey, just wondering in those pics, the 35s or 285/75. About to order a new wheel setup and had the same 70 vs 75 dilemma