What have you done to your 2nd gen Tundra today?

I got the 10inch about 2 years ago.. Best mod in my opinion! Make sure you install the resonator!

 

Is the hole precut foe the resonator?

 

She got a new radiator, thermostat, coolant, driver side CV axle, and new rotors and pads on all 4 corners.

 

My '08 RCSB is in the shop right now getting a full OME 2.5", and sick new 295/70 shoes/wheels. Very pumped! probably wont be done till next week though... so a long weekend

 

Nope. You may be able to order it precut though, but then you wouldn't have the flexibility of adjusting placement if it's a little off and bumps into something, like the bottom of the bed.

 

Gee, you were so "excited" too. Moving

When you buy a system from Keith, you keep your stock tailpipe. In my case,when I bought my first exhaust (10") I gave my tailpipe away so he sent me one with the system. He pre-cut it for me, it's been fine where he put the hole. Because my tailpipe stays, I won't need to mess with the resonator or where it is. They haven't changed over the years. When my 20"exhaust came,there was a new resonator included that they sent by mistake, it'll get returned with my old exhaust.

 

Not interested in a "date" hon, just passing along some information.

 

Finally got around to install a VIOFO dash cam (father’s day gift)into my truck. Wasn’t sure I’d like it, but it was amusing watching the video of my Tundra being serviced yesterday!

 

NO no no. The date would be with Kieth. Cuz of the testemonial.... Is this getting weird?

Never mind. Just interested in what the damn system sounds like, if you are so inclined.

 

Yesterday I installed the missing bottle opener to my new to me Decked system. Also installed tie downs into the rails they had already installed in the Decked system. And finally installed drain plugs in the drawers in case I wanted to fill it up with ice. I put the drain plug at the rear of the drawer and unscrews from the bottom as I had plenty of space between the drawer and tailgate.




This morning I’m repainting my amp steps with a spray Bedliner paint.

 

Sorry Trey, not weird, just me misunderstanding.... once AGAIN! I'll be sure to 'attempt' a sound video when the system is on.

 

Mine got insurance, full tank of premium and the first pressure wash it’s had in a year. Even vacuumed all the hay bits out the cab. She’s a road goat again!

 

I see you have the AC on while working in there. It's hot over here on the Tampa side already.

 

yeah I’m in tampa too (Lutz) and I used AC while not poking at wires, but turned it off to solder and test wires.

After 2 failed attempts I found a locksmith that knows his craft.
Had him swap the 80s key fob for one of those fancy European luxury switch blade keys. Ooh La La

Edit: yes the new key folds in half

 

Bought air filter and cabin filter- installed denso air filter ( got rid of k and n) - will i stall cabin filter at daybreak

 

In preparation for some new wheels and 10mm spacers, I replaced my wheel studs with extended studs. These are 14x1.5 studs. They are almost an inch longer than stock. I measured all the important specs like the diameter of the knurled section and whatnot. It all checks out.

If you are interested, you can find them on ebay in packs of 12 or 24. They were literally the only extended wheel studs i could find that were the right size.



I thought i might have to cut the cap off my stock lug nuts until i got the new wheels and aftermarket lug nuts, but as you can see, the factory nuts thread all the way down to the rotor without issue. So no cutting for me.

 

Installed some LED puddle lights. What a difference! Fit like a glove, only had to crimp down the spade connectors a little

 

Carrier bearing spacers

 

Finally finished my bed shelf concept! This will allow all of the space above the mid line under the topper to be usable for gear (bows, guns, duffle bags, bins, etc.). It still allows plenty of space for coolers, bags, bins, etc. underneath. I have 2 stacked Milwaukee pack out bins for recovery gear and they fit perfectly.

The frame is made out of 80/20 extrusion (2x2 and 1x2) and is bolted right through the topper and the lip of the bed. It is solid. The shelf itself is a piece of plywood u-clamped to the aluminum frame. This is where the project went south in my eyes. It looks really janky and unfinished. Being version 1 (prototype/concept), I am going to run it as is for hunting season to see how I like it/how it holds up. If all is good, I will rework it and make it pretty over the winter months. I am thinking either carpet or bed liner for the shelf and using some 80/20 brackets to bolt the wood to the frame. No u-clamps, I don't like that.



I also threw in a RAM iPad mount so I can run OnX on my big screen. I have 2 mounting balls to make a sturdy base, the rest can be configured how you see fit. Should be nice!







Lastly, I finished my hitch rack. The swing-out arrived and everything meshed together nicely. More storage! The frame up above the rack is 80/20 as well. I'm done with 80/20 projects, it's expensive!

 

I think that was the second mod I did to mine after I got it.

 

What is that?

 

Spent my first night in the Tundra. My old Tacoma sized tent nearly fit, the upgraded version should be here this week…

 

Got the new wheels and tires mounted. Somehow the tundra can make even 37s look small...

 

Spend a few hours detailing my Truck. Paint still holding up for a 15 yr old truck.

 

How's the articulation there? Looks like a trail would tear that up?

 

Nice! Still looks perfect!

Wish I could say that about my '08, the factory white is starting to oxidize. It was garaged most of its life, too!

 

I have an white 07 that has spent it's entire life outdoors (granted it has been in the pacific NW), and it was looking fairly ratty. I hire a mobile detailer to come an do a light paint correction on it a couple of months ago and it looks like brand new. Since white doesn't have a clear coat, I am going to give ceramic coat a try next.

 

Finally got around to installing my Victory cab-over rack. Came out awesome... The harbor freight hoist made doing it solo easy. Changed out how my awning was mounted to the ARB factory mounts and quick release bolt on's. Needed a bit more clearance for the cab rack to fit. Pulled the headliner just enough to see what I was doing, protect the air bags while drilling, and sneak a vacuum in there to get the shavings. Drill stops made the holes simple, used a uni-bit to ream the holes to a tight fit. Only SNAFU was the Astro rivnut setter I bought, broke on the 2nd nut... WTF! So I ended up setting them by hand...

 

I did try applying one of the Maguire's paint restore products which seemed to help a little, but I'm also very impatient with rubbing compounds of any kind and hate doing that kind of work, even with a polisher.

We have a couple of mobile community detailers in the area, I'll give them a try. Thanks!